489107

Marmitek Gigavideo 580 Manual

4
Zoom out
Zoom in
Previous page
1/44
Next page
4 © MARMITEK
2. SET CONTENTS
1 A/V Transmitter 2 RCA cables (white / red / yellow)
1 A/V Receiver 1 SCART adapter (labelled Transmitter).
2 Power adapters 1 SCART adapter (labelled Receiver)
1 IR Extender cable with 2 LEDs. 1 User manual
3. SETTING UP THE TRANSMITTER
1. Connect one set of cables to the AUDIO-[D] and VIDEO [C] input of your Marmitek
GigaVideo Transmitter. Make sure to match the colours of the plugs on the cable with the
jacks on the GigaVideo Transmitter.
2. Connect the other end of the cable to the Audio/Video OUT jacks of the video source
you want to transmit the signal from (e.g. your VCR, DVD, Satellite or TV: connecting the
transmitter to your VCR or Satellite receiver, allows you to choose channels independent
from your main TV). If your video source is equipped with a SCART connector use the
SCART Adapter labelled Transmitter.
3. Set the channel selector [A] (1-2-3-4) to 1.
4. Switch the power slide switch [B] to ‘OFF’.
5. Plug the supplied power adapter into a wall outlet and connect the plug at the rear side of
the transmitter [E]. Only use the supplied power adapter!
6. Switch the power slide switch [B] to ‘ON’.
7. Position the transmitter in a convenient location, preferably free on all sides, and orient the
antenna [K] so that the flat side faces the direction of the room where you will set up the
receiver.
If you have several A/V devices:
If you have two or more A/V devices that you want to watch in another room, they will
probably already be hooked up to the local TV in series. To connect the GigaVideo Transmitter
you just need to identify the last component in the chain and connect the LINE OUT or SCART
to the GigaVideo Transmitter IN jacks.
4. SETTING UP THE RECEIVER
1. Connect a set of Audio/Video cables to the LINE OUT jacks [H+I] of your GigaVideo
receiver. Take care to match the colours of the plugs on the cable with the jacks on the
GigaVideo receiver.
2. Set the channel selector [A] (1-2-3-4) to 1.
3. Switch the power slide switch [B] to ‘OFF’.
4. Plug the supplied power adapter into a wall outlet and connect the plug to the backside of
the receiver [E]. Only use the supplied power adapter!
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Gigavideo 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Gigavideo 580 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info