122674
76
Zoom out
Zoom in
Previous page
1/80
Next page
76 MARMITEK
12.1 De HuisCode voor Home Control wijzigen
De vaste HuisCode is A. In de meeste gevallen hoeft u deze code niet te wijzigen, tenzij u
last hebt van storing door signalen van andere Marmitek X-10-systemen. In dat geval:
1. Druk op de Marmitek X-10 Home Control-knop .
2. Druk op SETUP en houd deze knop ingedrukt totdat het LED-lampje continu brandt.
3. Laat SETUP los.
4. Druk nogmaals op SETUP.
5. Gebruik de numerieke toetsen op het Touchscreen om het cijfer voor de HuisCode in
te voeren (1=A, 2=B etc.). 16=P).
6. Druk op ENTER, gevolgd door EXIT om uw keuze te bevestigen.
Opmerking: De code die u kiest moet dezelfde zijn als die is geselecteerd voor de
Transceivermodule TM13 of de beveiligingsconsole die u voor uw afstandsbediening gebruikt.
12.2 De IR/RF-modus van Home Control programmeren
Uw ET35-afstandsbediening kan uw elektrische apparatuur besturen via infraroodsignalen
(via een IR Mini-Controller IR7243) of radiosignalen (via de Transceiver-module TM13). De
-knop is standaard ingesteld op het verzenden van radiosignalen.
Om de -knop in te stellen op een infraroodsignaal gaat u als volgt te werk:
1. Activeer uw ET35-afstandsbediening door het scherm aan te raken.
2. Druk op het Touchscreen op SETUP en wacht tot het LED-lampje gaat branden
(na 2-3 seconden) en op het scherm het Main Setup Screen wordt weergegeven.
3. Laat de SETUP-knop los.
4. Druk op de CODE-knop op het scherm.
5. Op het scherm wordt nu het Mode Setup Screen weergegeven. Druk op de Marmitek
X-10 Home Control-knop .
6. Op het scherm wordt nu het Code Setup Screen weergegeven. Voer 821 in.
7. Druk op de EXIT-knop op het Touchscreen om terug te gaan naar normale weergave.
Om de -knop in te stellen op een radiosignaal gaat u als volgt te werk:
1. Activeer uw ET35-afstandsbediening door het scherm aan te raken.
2. Druk op SETUP en wacht tot het LED-lampje gaat branden (na 2-3 seconden) en op
het scherm het Main Setup Screen wordt weergegeven.
3. Laat de SETUP-knop los.
4. Druk op de CODE-knop op het scherm.
20055_20061108_UG_EasyTouch_35_touchscreen_remote 09-11-2006 10:22 Pagina 76
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch 35 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info