580159

Marmitek DS90 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
ADDING A WIRED SENSOR TO THE DOOR/WINDOW
SENSOR DS90
The DS90 Door/Window Sensor has a contact for an extra wired sensor. These sensors need
to be of type NC (normally closed contacts). There should not be any power on this contact
(potential-free).
1. Open the transmitter part of the DS90 by removing the screw.
2. Remove the wire bridge from the connection for the wired sensor (6).
3. Connect your sensor.
The wired contact has its own zone on the console. You can register the contact using the
procedure as described in your manual. To register the sensor, trigger the alarm of your wired
sensor while registering it.
☺ The setting of the MIN/MAX switch (entry delay) of the DS90 is valid for both the
magnetic contact and the wired sensor.
TECHNICAL DATA
Power : 2x AAA battery
Range: Up to 100m free field, up to 30m through walls and ceilings
Dimensions: 44x86x20mm
Frequency: 433.92 MHz
4 MARMITEK
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed
of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the government or local authorities. Correct
disposal and recycling will help prevent potential negative consequences to the environment and human health. For
more detailed information about the disposal of your old equipment, please contact your local authorities, waste
disposal service, or the shop where you purchased the product.
20073-20070228_UG_DS90 06-03-2007 10:40 Pagina 4
20073-20070228_UG_DS90.pdf 420073-20070228_UG_DS90.pdf 4 06-03-2007 10:49:1506-03-2007 10:49:15
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek DS90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DS90 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info