613379

Marmitek Connect 310 HDMI Manual

5
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
5CONNECT 310™
Battery
Remove the plastic strip from the battery compartment to activate the battery and use the
remote control.
USING THE SWITCHER
Switching between the connected HDMI sources
Automatically
When one of the HDMI sources is switched on, the Connect310 will automatically switch to
the correct input channel. If multiple HDMI sources are already switched on, the Connect310
will automatically switch to the last HDMI source activated.
Remark: Automatic switching has to be supported by the HDMI source.
With the selection button on the switcher
With the Select button at the top of the panel you can manually switch between the various
HDMI sources.
With the remote control
Point the remote control at the external infrared receiver of the Connect310 and press the
number that corresponds with the desired HDMI source.
The LED lighting on top of the panel shows which source is selected.
FREQUENTLY ASKED QUESTIONS
No (or poor) image and sound
If you experience poor or no image after connecting the HDMI switcher, try to recover the
problem by connecting the devices one at the time to your screen (TV, monitor or projector).
This way you can determine whether the problem lies with the HDMI sources, the HDMI
cables, the HDMI switcher or the screen. HDMI devices which are not tested and certified by
ATC (Authorized Test Centers) can cause image and sound problems.
• Check if the power adaptor of the Connect310 is connected and plugged into the mains.
• Only use High Speed HDMI® certified cables for the best picture and sound quality.
• Do not use HDMI cables that are longer than specified in the technical data.
• Both the HDMI source and your screen have to support HDMI fully.
• Check whether your HDMI sources, DVI device and screen support the copy protection
HDCP (High-bandwidth Digital Content Protection).
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Connect 310 HDMI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Connect 310 HDMI in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info