37775
32
Zoom out
Zoom in
Previous page
1/34
Next page
28
ENGLISH
Symptom Cause Measures Page
The RDS (Radio Data
System) doesnt seem
to work?
CD playback skips?
Noise is generated.
Cant play a CD?
It takes a long time to
read CD/MP3.
It takes a long time to
locate certain tracks.
The clock is wrong?
No sound is output
when a timed playback
or recording task starts?
Standby indicator
ashes.
The current FM station does
not support RDS.
The signal strength is poor, or
theres too much interference.
The CR601 is subject to
vibration.
The disc is dirty.
The disc is very scratched.
DTS CD is being replayed.
The disc is upside down.
The disc is dirty.
Condensation has formed
inside the CR601.
The CD-R/RW disc is
nonstandard.
It may take a longer time to
read CD/MP3 with many track
numbers.
The disc is dirty.
The disc is very scratched.
CT (Clock Time) information
has been taken from a radio
station in another time zone.
While a timed recording task is
in progress, the output of the
CR601 is muted.
For timed playback, the
volume is determined by the
VOLUME control.
The protection circuit may be
activated.
Tune into a station that
supports RDS.
Install an outdoor FM antenna,
change the position or
direction of your outdoor FM
antenna, and keep it away
from uorescent lights.
Install the CR601 somewhere
free of vibration.
Remove the disc and clean it.
Buy a new disc.
Do not replay DTS CD, which
is not supported by the CR601.
Load the disc with the label-
side facing up.
Remove the disc and clean it.
Remove the disc and leave the
CR601 turned on for several
hours until the condensation
has evaporated.
See Disc Notes.
This is not a malfunction.
Remove the disc and clean it.
Buy a new disc.
Set the clock by Manual
operation.
To hear whats being recorded,
press the
MUTE button
to
cancel the Mute function. Press
it again to mute the CR601.
Set the volume to a suitable
level.
Make sure not to short-circuit
the positive and negative
speaker wires.
17
8
2
3
3
2
12
3
2
2
2
3
2
24
24
11
9
Abnormal Behavior:
The CR601 contains a microcomputer for signal processing and control functions. In very rare situations,
severe interference, noise from an external source, or static electricity may cause it to lockup. In the
unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five
seconds, and then plug it back in again.
CR601N_01 Eng 05.10.21 1:22 PM ページ28
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CR601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CR601 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info