636175

Marantec Digital 341 Manual

1
Zoom out
Zoom in
Previous page
1/4
Next page
A: Digital 341 B: Digital 342
Montage:
Montieren Sie den Empfänger an die Wand.
Anschluss:
- Spannungsversorgung: IN1, IN2
- Relaiskanal 1: NO1-COM1 Schließer
NC1-COM1 Öffner
- Relaiskanal 2: NO2-COM2 Schließer
NC2-COM2 Öffner
Sendercode speichern:
• Entfernen Sie den Gehäusedeckel.
Handsender auf Kanal 1/Kanal 2 einstellen:
• Betätigen Sie die Taste TA1/TA2 für ca. 3
Sekunden.
-> Die LED blinkt.
• Betätigen Sie innerhalb von 10 Sekunden die
gewünschte Taste des Handsenders.
Hat der Empfänger den Sendercode gespeichert,
blinkt die LED für ca. 2 Sekunden schnell.
• Setzen sie den Gehäusedeckel wieder auf.
Technische Daten:
Spannungsversorgung: 12-24V AC/DC
Stromaufnahme: ca. 50 mA
Die Betriebsart ist wählbar über die
Codierbrücke J1: Pos. 1-2: Torantriebsimpuls
Pos. 2-3: EIN/AUS
Max. Kontaktbelastung: 60V DC/1A/30W
125V AC/1A/62VA
Temperaturbereich: -20˚C - +60˚C
A: Digital 341 B: Digital 342
Installation :
Mount the receiver to the wall.
Connection :
- Power supply: IN1, IN2
- Relay channel 1: NO1-COM1 NO contact
NC1-COM1 NC contact
- Relay channel 2: NO2-COM2 NO contact
NC2-COM2 NC contact
Store transmitter code:
• Remove housing cover.
Adjust hand transmitter to channel 1/channel 2:
• Actuate the button TA1/TA2 for approx. 3 sec.
-> The LED is flashing.
• Press the desired button of the hand
transmitter within 10 seconds.
As soon as the receiver has saved the transmitter
code, the LED flashes quickly for approx. 2 sec.
• Put back the housing cover.
Technical Details:
Power supply: 12-24V AC/DC
Current input: ca. 50 mA
Mode of operation can be programmed via
Coding bridge J1: Pos. 1-2: door operating
pulse
Pos. 2-3: ON/OFF
Max. contact rating: 60V DC/1A/30W
125V AC/1A/62VA
Temperature tolerance: -20°C to +60°C
A: Digital 341 B: Digital 342
Montage:
Montez le récepteur au mur.
Branchement:
- Alimentation: IN1, IN2
- Canal de relais 1: contacteur NO1-COM1
rupteur NC1-COM1
- Canal de relais 2: contacteur NO2-COM2
rupteur NC2-COM2
Enregistrer le code de l’émetteur:
• Retirez le clapet du boîtier.
Régler l’émetteur sur canal 1/ canal 2:
• Appuyez pendant 3 secondes environ sur la
touche TA1/TA2.
-> La LED clignote.
• Appuyez dans les 10 secondes sur la touche
sélectionnée de l’émetteur.
Quand le récepteur a enregistré le code, la LED
clignote rapidement pendant 2 secondes environ.
• Remettez le clapet du boîtier en place.
Caractéristiques techniques:
Alimentation: 12-24V AC/DC
Courant absorbé: 50 mA env.
Le pont de codification J1 permet de sélectionner
le type de fonctionnement:
Pos. 1-2: Impulsion de l’opérateur
Pos. 2-3: MARCHE/ ARRET
Charge max. de contact: 60V DC/1A/30W
125V AC/1A/62VA
Températures: -20°C à +60°C
A
B
#Digital 341/342-2003-2 01.07.2003 12:43 Uhr Seite 1
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Digital 341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Digital 341 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info