15426
40
Zoom out
Zoom in
Previous page
1/40
Next page
0
Special Pointers on Using the Mamiya RB67 Pro-S
Various safety interlock devices are provided for the
Mamiya RB67 Pro-S to eliminate failures through care-
lessness. When the shutter is not released, or when the
lens or the roll film holder cannot be removed, do not
hastily
concluded
that this indicates a camera malfunction.
Ascertain the following conditions. The Instruction Manual
pages covering these situation are indicated in paren-
theses.
l
Shutter release button cannot be depressed
l
Lens cannot be removed
(1) Is the roll film holder loaded with a roll of film and has the film
been advanced to the first exposure?
When shutter releasing is desired without loading film, by sliding
the multiexposure lever forward and setting the shutter cocking
lever and pulling out the dark slide, the shutter can be released.
(P.17)
(2)
After
the shutter was released during ordinary exposure (not under
multiple exposure), did you advance the film?
Advance the film with the film advance lever.
(3) Is the mirror set?
Set the mirror by pressing down the shutter cocking lever.
(4) Was the dark slide drawn out?
Draw out the dark slide.
(5)
Is the shutter release button locked?
Press down the shutter cocking lever. Set the mirror and the
shutter. (P.13)
l
When mounting the film holder, the slide lock cannot
be moved
While pressing the slide lock release lever, move the slide lock
to the left. (P.16)
l
Roll film holder cannot be removed
After inserting the dark slide, operate the slide lock.
l
Regarding the mirror release operating knob
Turn the shutter release lock ring counterclockwise and align it
with the white dot. (P.13)
(6) Is the revolving adapter turned up to the click stop position?
Turn the adapter until it stops with a click. (P.15)
(7) Has the slide lock on the revolving adapter stopped halfway?
Move the slide lock up to the position where it stops.
(P.16)
Normally align the knob with the red dot. When it is aligned with
the MIRROR-UP index mark, and merely the shutter release
but-
ton is pressed, the mirror and the light baffle will operate, but no
image will be recorded on the film.
(P.
29)
39
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamiya RB67proS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RB67proS in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info