676339
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
6. Troubleshooting
Malfunction Possible Causes Solutions
The device gets
slippery or works in
irregular patterns.
A. Glass is too dirty or
too wet.
B. Cleaning pad is too
dirty or too wet.
A. Change cleaning pad.
B. Clean the driving treads.
C. Use remote control to manually restart it.
Insufcient suction
power.
Insufcient suction
power.
A. Check if the cleaning pad is attached properly,
replace it correctly.
B. Check if there is any crack on the glass.
C. Check if the glass frames are with uneven area/
rubber part. If there is uneven area or uneven
rubber part on the glass, use remote control
to operate the device manually and keep the
W120 away from the uneven area / uneven
rubber part when cleaning.
The devices can’t be
started after switched
on, or works in irregular
patterns.
Edge detection sensor
abnormal.
A. Remove the cleaning pad and reattach it ma-
king sure it is placed exactly within its velcro area
and does not cover the edge detection sensors.
B. Open APP on your phone, connect it with the
robot and nd out if any RED indications on the
corners of APP interface (Red indications on the
APP interface means the edge sensor is malfunc-
tioned).
C. Edge detection sensors failure, contact after-sa-
les service.
Red indicator light
ashes, buzzer beeps
once/second
Improper connection of
Power Supply.
Check if the plug is connected well, or the screws of
the extension cables are placed tight.
Both Red and Blue
indicator lights ash.
Hardware failure. Contact after-sales service.
Remote control does
not work.
A. No battery inside
or battery has low
power.
B. Remote control is
broken.
A. Change the battery.
B. Replace the remote control with new one.
The device got stuck
on glass frames.
Edge-detection misjud-
gement.
A. Press STOP on remote control, move the device
to reachable location rst.
B. Pull the robot lightly to reachable location if you
can’t remote control it.
Both Red and Blue
Light on, no beeps.
The device is not sucking
properly on window.
Put the device on window surface manually, make
sure it sucks on the window properly.
Buzzer beeps twice
when it’s in use.
Edge sensor detects
frameless glass.
It’s normal, if it is cleaning frameless glass.
Squeaky sound when
it’s in use.
Glass is too dry or edge
detection sensors are
too dirty.
A. Spray a little bit of water on the cleaning cloth.
B. Clean the edge detection sensors and operate
again.
The device doesn’t
return to Starting Point
after cleaning.
The glass surface’s fricti-
on index is different.
Use remote control to direct the device return to
reachable location.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mamibot W120 iglassbot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mamibot W120 iglassbot in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mamibot W120 iglassbot

Mamibot W120 iglassbot User Manual - English, German - 72 pages

Mamibot W120 iglassbot User Manual - German - 12 pages

Mamibot W120 iglassbot User Manual - French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info