600304
10
Zoom out
Zoom in
Previous page
1/64
Next page
10
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Blade cover
Shear blade assembly
Makita genuine battery and charger
Chip receiver
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
ENG905-1
The typical A-weighted noise level determined according
to EN60745:
Model UH420D
Sound pressure level (L
pA
): 74 dB (A)
Sound power level (L
WA
): 82.5 dB (A)
Uncertainty (K): 2.5 dB (A)
Model UH480D
Sound pressure level (L
pA
): 75 dB (A)
Sound power level (L
WA
): 83.2 dB (A)
Uncertainty (K): 2.5 dB (A)
Model UH482D
Sound pressure level (L
pA
): 75 dB (A)
Sound power level (L
WA
): 82.8 dB (A)
Uncertainty (K): 2.5 dB (A)
Model UH520D
Sound pressure level (L
pA
): 75 dB (A)
Sound power level (L
WA
): 82.9 dB (A)
Uncertainty (K): 2.5 dB (A)
Wear ear protection.
Vibration
ENG900-1
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: hedge trimming
Vibration emission (a
h
): 2.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
ENH040-4
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Model No./Type:
UH420D, UH480D, UH482D, UH520D
Specifications: see “SPECIFICATIONS” table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V
Model UH420D
Measured Sound Power Level: 82.5 dB (A)
Guaranteed Sound Power Level: 84 dB (A)
Model UH480D
Measured Sound Power Level: 83.2 dB (A)
Guaranteed Sound Power Level: 86 dB (A)
Model UH482D
Measured Sound Power Level: 82.8 dB (A)
Guaranteed Sound Power Level: 84 dB (A)
Model UH520D
Measured Sound Power Level: 82.9 dB (A)
Guaranteed Sound Power Level: 86 dB (A)
25. 11. 2014
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH522D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH522D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info