598776

Makita UH 5530 Manual

5
Zoom out
Zoom in
Previous page
1/44
Next page
5
Working technique
- Work only in good lighting and visibility.
- Never work on an unstable surface. Pay attention to
obstacles in the work area - risk of stumbling! Pay constant
attention to good footing.
- Never work while standing on a ladder.
- Do not bend too far over while working.
- Guide the trimmer away from your body, with the cutter
pointing away and at a safe distance from your body.
- Use the hedge trimmer
only for trimming hedges! Do not
use it for cutting grass or brash.
- Always keep the ventilation slots unobstructed, to ensure
proper cooling of the electric motor.
- Do not allow the cutter to touch the ground when running.
Foreign objects will damage the cutter and may lead to
injury.
- Do not use the trimmer to lift, lever, or sweep away cut
material or other objects.
- Cut thick branches to length with pruning shears before
trimming the hedge.
- Do not start working until you have made sure that:
a) No other persons or animals are within the working
area.
b) The trimmer operator can step back unhindered in the
event of an emergency.
c) The ground is free of all foreign objects, brush, and
branches. The operator must have a sure footing (risk
of stumbling).
Tips on trimming hedges
The procedure described here can be used very often and makes working easier. If a hedge has to be cut back very substantially,
it should be trimmed in two passes.
1
- First cut the hedge to the desired height (1). With practice,
it is possible to remove cut material from the hedge with a
swinging motion. To get a straight cut, stretch a string along
the hedge at the desired height.
2
- Trim the hedge to a trapezoidal shape (about 10 cm / 4" in
at the top for every 1 m / 3’3" of height), cutting from bottom
to top (2). In this way you avoid cut material falling down into
the area not yet cut.
3
- Round off the top edges of the hedge (3), and finally trim the
bottom edges back somewhat (4).
4
The best times to trim hedges are:
Broad-leaf hedges: June and October
Coniferous hedges: April and August
Fast-growing hedges: About every 6 weeks starting in May
Environmental protection information
Do not use the hedge trimmer during times when people are likely to be resting.
Before trimming a hedge, check to make sure that no birds are nesting in it. If they are, wait until the young have left the nest before
trimming near that part of the hedge.
Dispose of cut material in an environment-friendly way, or compost it.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH 5530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 5530 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info