598776
2
Zoom out
Zoom in
Previous page
1/44
Next page
2
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA hedge trimmer!
We are confident that you will be satisfied with this modern
machine.
Models UH 4030, UH 4830, UH 5530 and UH 6330 are very
light and handy hedge trimmers, with high performance and
a good power-to-weight ratio.
The ergonomic design of the grips and controls make for
comfortable and untiring operation during extensive jobs. A
strain reliever is provided for the power cord at both ends.
The safety features of the UH 4030, UH 4830, UH 5530 and
UH 6330 hedge trimmers are state of the art and meet all
international standards. These features include hand guards
on both handles, 2-hand grip safeties and a quick-stop function.
In order to ensure the proper functioning and performance
of your new hedge trimmer, and to safeguard your own
personal safety, it is imperative that you read this instruc-
tion manual thoroughly before operation. Be especially
careful to observe all safety precautions! Failure to ob-
serve these precautions can lead to severe injury or
death!
Table of contents
EU Conformity Declaration................................................2
Packaging ............................................................................2
Symbols ...............................................................................2
Delivery inventory ..............................................................3
SAFETY PRECAUTIONS ....................................................3
General precautions........................................................3
Protective equipment ......................................................3
Putting into operation .................................................. 3-4
Extension power cord .....................................................4
Transport and storage ....................................................4
Maintenance....................................................................4
First aid ...........................................................................4
Working technique ..........................................................5
Tips on hedge-trimming.....................................................5
Environmental protection information.............................5
Technical data.....................................................................6
Designation of components ..............................................6
PUTTING INTO OPERATION..............................................7
Checking the blade brake ..............................................7
MAINTENANCE ...................................................................7
Cleaning and maintaining the cutter ...............................7
Instructions for periodic maintenance.............................7
Trouble shooting ................................................................7
Service, spare parts and guarantee .................................8
Service centres (see enclosure)
EU Conformity Declaration
The undersigned, Junzo Asada and Rainer Bergfeld, as
authorized by DOLMAR GmbH, declare that the MAKITA
machines,
Type: UH 4030, UH 4830, UH 5530, UH 6330
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machine guideline 98/37/ EG
EU EMC guideline 89/336/ EWG (modified by 91/263/ EWG,
92/31/ EWG and 93/68/ EWG)
EU Low-voltage guideline 73/23/ EWG (modified by 93/68/
EWG)
The most important standards applied to properly meet the
requirements of the above EU guidelines were: EN 50144-1,
EN 50144-2-15, EN 55104, EN 55014, EN 61000-3-T2/-T3.
Hamburg, 6.12.1999
For DOLMAR GmbH
Junzo Asada Rainer Bergfeld
Managing Director Managing Director
Symbols
You will notice the following symbols on the hedge trimmer
and in the Instruction Manual:
Packaging
Your MAKITA hedge trimmer is delivered in a cardboard box
to protect it during shipping.
Cardboard is a basic raw material and is consequently
reuseable or suitable for recycling (waste paper recycling).
RE Y
STOP
RE Y
Read Instruction Manual and follow
all warnings and safety instructions!
Particular care and attention!
Forbidden!
Protect from rain and moisture!
Pull mains plug if power cord is damaged!
Pull mains plug!
Double protective insulation
Switch off motor!
Wear protective gloves!
Wear eye and hearing protection!
First aid
Recycling
CE-marking
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH 5530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 5530 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info