448689
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
ENGLISH
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Note: Specifications may differ from country to country.
Symbols
END220-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual and follow the
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
DOUBLE INSULATION
Caution: particular care and attention
required!
Caution: withdraw the mains plug
immediately if the cable is damaged!
Protect against rain and damp!
Wear safety gloves!
Withdraw the mains plug!
First aid
Recycling
CE marking
............. Prohibited!
Intended use
ENE014-1
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
GEA005-2
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
1. Switch trigger B
2. Switch trigger A
3. Switch trigger C
4. Hook complete
5. Tool’s cord
6. Extension cord
7. Hook
8. Tool
9. Holder
10. Waist cord hook
11. Cord
12. Arm cord hook
13. Trimming direction
14. Tilt the blades
15. Hedge surface to be trimmed
16. Press
17. Chip receiver
18. Nut
19. Shear blade
20. Branch catcher
21. Hooks
22. Fit the hooks into groove
23. Grooves
24. Press the hooks on both sides
25. Unlock the hooks
26. Screws
27. Blade cover
28. Under cover
29. Gear housing cover
30. Crank
31. Ellipse of shear blade
Model UH4570 UH5570 UH6570
Blade length 450 mm 550 mm 650 mm
Strokes per minute (min
-1
) 1,600 1,600 1,600
Overall length 862 mm 970 mm 1,042 mm
Net weight 3.5 kg 3.6 kg 3.7 kg
Safety class /II
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita UH 4570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita UH 4570 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info