Manual Makita PO6000C (page 4 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691394

Zoom out

Zoom in

1/52

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: PO5000C PO6000C

Pad diameter 125 mm 150 mm

Orbits per minute 0 - 6,800 min

-1

Overall length 451 mm

Net weight 2.8 kg

Safety class

/II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

withoutnotice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2003

Intended use

Thetoolisintendedforpolishing.

Power supply

Thetoolshouldbeconnectedonlytoapowersupplyof

thesamevoltageasindicatedonthenameplate,and

canonlybeoperatedonsingle-phaseACsupply.They

aredouble-insulatedandcan,therefore,alsobeused

fromsocketswithoutearthwire.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ingto60745-2-4:

Model PO5000C

Soundpressurelevel(L

):81dB(A)

Soundpowerlevel(L

):92dB(A)

Uncertainty(K):3dB(A)

Model PO6000C

Soundpressurelevel(L

):83dB(A)

Soundpowerlevel(L

):94dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

minedaccordingto60745-2-4:

Model PO5000C

Workmode:polishing

Vibrationemission(a

h,AP

):6.5m/s

Uncertainty(K):1.5m/s

Model PO6000C

Workmode:polishing

Vibrationemission(a

h,AP

):7.0m/s

Uncertainty(K):1.5m/s

NOTE:

Thedeclaredvibrationemissionvaluehasbeen

measuredinaccordancewiththestandardtestmethod

andmaybeusedforcomparingonetoolwithanother.

NOTE:

Thedeclaredvibrationemissionvaluemay

alsobeusedinapreliminaryassessmentofexposure.

WARNING:

Thevibrationemissionduringactual

useofthepowertoolcandifferfromthedeclaredemission

valuedependingonthewaysinwhichthetoolisused.

WARNING:

Besuretoidentifysafetymeasurestopro-

tecttheoperatorthatarebasedonanestimationofexposure

intheactualconditionsofuse(takingaccountofallpartsof

theoperatingcyclesuchasthetimeswhenthetoolisswitched

offandwhenitisrunningidleinadditiontothetriggertime).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

tothisinstructionmanual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings and all

instructions. Failuretofollowthewarningsandinstruc-

tionsmayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless)powertool.

Polisher safety warnings

This power tool is intended to function as a pol-

isher. Read all safety warnings, instructions, illus-

trations and specications provided with this power

tool.Failuretofollowallinstructionslistedbelowmay

resultinelectricshock,reand/orseriousinjury.

2. Operations such as grinding, wire brushing

or cutting-off are not recommended to be

performed with this power tool.Operationsfor

whichthepowertoolwasnotdesignedmaycreate

ahazardandcausepersonalinjury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita PO6000C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 9,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita PO6000C Manual

Product: