389733

Makita mkt 9046 Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
5
Paper dust bag
To install the paper dust bag, place the paper dust bag on
the paper dust bag holder with its front side upward.
Insert the front fixing cardboard of the paper dust bag
into the groove of the paper dust bag holder. (Fig. 5)
Then press the upper part of the front fixing cardboard in
arrow direction to hook it onto the claws. (Fig. 6)
Insert the notch of the paper dust bag into the guide of
the paper dust bag holder. Then install the paper dust
bag holder set on the tool. (Fig. 7 & 8)
Note:
If you connect a Makita dust collector to your sander,
more efficient and cleaner operations can be performed.
Switching ON and OFF (Fig. 9)
CAUTION:
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.
To switch on, press the trigger. To switch off, release the
trigger.
Continuous running (Fig. 9)
Press the trigger and at the same time push the lock but-
ton. To stop this lock position, press the trigger and
release it.
Front grip (Fig. 10)
The front grip position can be changed in 90° increments.
Pull the front grip and rotate it to the desired position.
Operation (Fig. 11)
Sand the workpiece while applying only slight pressure to
the tool. Keep the base flush with the workpiece at all
times.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. The accessories or
attachments should be used only in the proper and
intended manner.
• Abrasive paper
(with pre-punched holes)
115 mm (4-1/2”) x 280 mm (11”)
• Velcro type of abrasive paper
(with pre-punched holes)
115 mm (4-1/2") x 232 mm (9-1/8")
• Joint 25 (for connectiong to Model 431)
• Paper dust bag
• Paper dust bag holder
Grit 60 80 100 120 150 180 240
Use Coarse Medium Fine
Sheet per
pkg.
10 10 10 10 10 10 10
Grit 60 80 100 120 150 180 240
Use Coarse Medium Fine
Sheet per
pkg.
5555555
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita mkt 9046 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita mkt 9046 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info