448509

Makita HP 2034 Manual

5
Zoom out
Zoom in
Previous page
1/52
Next page
ENGLISH
Explanation of general view
1 Grip base
2 Side grip (auxiliary handle)
3 Teeth
4 Protrusions
5 Loosen
6 Tighten
7 Bit
8 Chuck key
9 Sleeve
0 Ring
q Depth gauge
w Switch trigger
e Lock button
r Reversing switch lever
t Speed change knob
y Action mode change knob
u Blow-out bulb
i Vent holes
SPECIFICATIONS
Model HP2032 HP2033 HP2034
Max. capacities
Concrete ......................................................... High: 20 mm 20 mm 20 mm
Low: — — —
Steel ............................................................... High: 8 mm 8 mm 8 mm
Low: 13 mm 13 mm 13 mm
Wood .............................................................. High: 25 mm 25 mm 25 mm
Low: 40 mm 40 mm 40 mm
No load speed (RPM) ....................................... High: 0 – 2,900 0 – 2,900 2,900
Low: 0 – 850 0 – 850 850
Blows per minute .............................................. High: 0 – 32,000 0 – 32,000 32,000
Low: 0 – 9,400 0 – 9,400 9,400
Overall length ............................................................. 370 mm 368 mm 370 mm
Net weight ................................................................... 2.5 kg 2.5 kg 2.5 kg
•
Due to our continuing program of research and
development, the specifications herein are subject
to change without notice.
•
Note: Specifications may differ from country to
country.
Power supply
The machine should be connected only to a power
supply of the same voltage as indicated on the
nameplate, and can only be operated on single-phase
AC supply. They are double-insulated in accordance
with European Standard and can, therefore, also be
used from sockets without earth wire.
Safety hints
For your own safety, please refer to the enclosed
safety instructions.
ADDITIONAL SAFETY RULES
1. Wear a hard hat (safety helmet), safety glasses
and/or face shield. It is also highly recom-
mended that you wear a dust mask, ear pro-
tectors and thickly padded gloves.
2. Under normal operation, the machine is
designed to produce vibration. The screws
can come loose easily, causing a breakdown
or accident. Check tightness of screws care-
fully before operation.
3. Always be sure you have a firm footing. Be
sure no one is below when using the machine
in high locations.
4. Hold the machine firmly with both hands.
Always use the side grip.
5. Keep hands away from rotating parts.
6. Do not leave the machine running. Operate the
machine only when hand-held.
7. When drilling into walls, floors or wherever
‘‘live’’electrical wires may be encountered, DO
NOT TOUCH ANY METAL PARTS OF THE
MACHINE! Hold the machine only by the insu-
lated grasping surfaces to prevent electric
shock if you drill into a ‘‘live’’ wire.
8. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely
hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Important:
Always be sure that the machine is switched off and
unplugged before installing or removing the side grip,
bit or other accessories.
Side grip (auxiliary handle) (Fig. 1)
Always use the side grip to ensure operating safety.
Install the side grip so that the teeth on the grip fit in
between the protrusions on the machine barrel. Then
tighten the grip by turning clockwise at the desired
position. It may be swung 360° so as to be secured at
any position.
Installing or removing drill bit
For HP2032 and HP2034 (Fig. 2)
To install the bit, place it in the chuck as far as it will
go. Tighten the chuck by hand. Place the chuck key in
each of the three holes and tighten clockwise. Be sure
to tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclock-
wise in just one hole, then loosen the chuck by hand.
After using the chuck key, be sure to return it to the
original position.
HP2032/HP2033 (E) (’99. 8. 20)
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HP 2034 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HP 2034 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita HP 2034

Makita HP 2034 User Manual - English, Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info