691706
20
Zoom out
Zoom in
Previous page
1/22
Next page
49 NEDERLANDS
OPMERKING: Het customlampje gaat branden
wanneer de bedieningsfunctie is gekozen die in het
gereedschap is geregistreerd.
Snelfunctieschakelen annuleren
Houd de knop en de snelfunctieschakelknop tege-
lijkertijd ingedrukt totdat het customlampje en alle slag-
krachtniveaulampjes knipperen.
OPMERKING: Nadat snelfunctieschakelen is gean-
nuleerd, kan door op de snelfunctieschakelknop te
drukken de slagkracht worden veranderd.
MONTAGE
LET OP: Zorg altijd dat het gereedschap is
uitgeschakeld en de accu ervan is verwijderd
alvorens enig werk aan het gereedschap uit te
voeren.
Aanbrengen of verwijderen van het
schroefbit of de schroefdop
Fig.12
Gebruik uitsluitend een schroefbit/schroefdop met een
insteekgedeelte zoals aangegeven in de afbeelding.
Gebruik geen ander schroefbit/schroefdop.
Voor gereedschappen met een ondiepe
schroefbit-insteekopening
A=12 mm
B=9 mm
Gebruik uitsluitend dit type
schroefbit. Volg procedure 1.
(Opmerking) De bitadapter is
niet nodig.
Voor gereedschappen met een diepe
schroefbit-insteekopening
A=17 mm
B=14 mm
Om dit type schroefbit te
plaatsen, volgt u procedure 1.
A=12 mm
B=9 mm
Om dit type schroefbit te
plaatsen, volgt u procedure 2.
(Opmerking) De bitadapter is
nodig om het bit te plaatsen.
Procedure 1
Voor gereedschap zonder snelkoppelingsbus
Fig.13: 1. Schroefbit 2. Bus
Om het schroefbit te plaatsen, trekt u de bus in de richting van
de pijl en steekt u het schroefbit zo ver mogelijk in de bus.
Laat daarna de bus los om het schroefbit te vergrendelen.
Voor gereedschap met snelkoppelingsbus
Om het schroefbit aan te brengen, steekt u het schroef-
bit zo ver mogelijk in de bus.
Procedure 2
Voorafgaande aan Procedure 1, steekt u de bitadapter
met zijn puntige uiteinde in de bus.
Fig.14: 1. Schroefbit 2. Bitadapter 3. Bus
Om het schroefbit te verwijderen, trekt u de bus in de
richting van de pijl en trekt u het schroefbit er uit.
OPMERKING: Als het schroefbit niet diep genoeg
in de bus wordt gestoken, zal de bus niet naar haar
oorspronkelijke positie terugkeren en zal het schroef-
bit niet goed vastzitten. In dat geval dient u het bit
opnieuw erin te steken volgens de bovenstaande
procedure.
OPMERKING: Als het moeilijk is om het schroefbit
aan te brengen, trekt u aan de bus en steekt u het
schroefbit zo ver mogelijk in de bus.
OPMERKING: Nadat u het schroefbit in de bus hebt
gestoken, controleert u dat het schroefbit stevig vast
zit. Als het uit de bus komt, mag u het niet gebruiken.
De haak aanbrengen
LET OP: Als u de haak aanbrengt, bevestigt u
deze altijd stevig met de schroef. Als u dit niet doet,
kan de haak losraken en tot persoonlijk letsel leiden.
Fig.15: 1. Gleuf 2. Haak 3. Schroef
De haak is handig om het gereedschap tijdelijk op
te hangen. De haak kan aan iedere zijkant van het
gereedschap worden bevestigd. Om de haak te beves-
tigen, steekt u deze in een gleuf op een zijkant en zet
u hem vast met de schroef. Om de haak eraf te halen,
draait u de schroef los en haalt u de haak eraf.
BEDIENING
Fig.16
Het juiste aandraaimoment kan verschillen afhankelijk
van het soort en de maat van de schroef/bout, het
materiaal van het te bevestigen werkstuk, enz. De ver-
houding tussen het aandraaimoment en de aandraaitijd
wordt aangegeven in de afbeeldingen.
Juiste aandraaimoment voor een standaardbout
N•m
(kgf•cm)
M14
M12
M10
M8
M16
M14
M12
M10
M8
M16
140
(1428)
(1224)
(1020)
(816)
(612)
(408)
(204)
120
100
80
60
40
20
01
2
1
2
1. Aandraaitijd (seconden) 2. Aandraaimoment
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita DTD171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita DTD171 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info