476840
5
Zoom out
Zoom in
Previous page
1/84
Next page
5
ENGLISH
Explanation of general view
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Lock-off button
2-2. Switch trigger
3-1. Sprocket cover
3-2. Knob
4-1. Cutter
4-2. Guide bar
4-3. Arrow
5-1. Spring
5-2. Sprocket
5-3. Boss
6-1. Spring
6-2. Guide bar
6-3. Boss
7-1. Sprocket cover
7-2. Hook
7-3. Hole
11-1. Oil tank cap
11-2. Oil inspection window
11-3. Oil tank opening
12-1. Tip guide
13-1. Lower guide
17-1. Battery cartridge
17-2. Scabbard (chain cover)
22-1. Push nut
22-2. Slotted bit screwdriver
23-1. Filter
25-1. Filter
26-1. Push nut
27-1. Sprocket
27-2. Locking ring
28-1. Locking ring
28-2. Sprocket
28-3. Washer
29-1. Limit mark
30-1. Brush holder cap
30-2. Screwdriver
SPECIFICATIONS
Model BUC121 BUC122
Chain speed per minute (min
-1
) 4.8 m/s (290 m/min) 5.0 m/s (300 m/min)
Length of guide bar 115 mm
Type 25 AP
Pitch 1/4"
Saw chain
No. of drive links 42
Overall length 422mm 422mm
Net weight 2.4 kg 2.5 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
END005-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear
protection.
Use appropriate protection for foot-leg
and hand-arm.
Do not expose to rain.
Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
This saw is to be used by properly
trained operators only.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE031-1
Intended use
The tool is intended for cutting lumbers and logs.
For Model BUC121
ENG101-2
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-13:
Sound pressure level (L
pA
) : 84.0 dB(A)
Uncertainty (K) : 2 dB(A)
The noise level under working may exceed 85 dB (A).
Wear ear protection.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita BUC122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita BUC122 in the language / languages: English, German as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info