389386

Makita bo4900v Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
5
ENGLISH
Explanation of general view
1 Clamp lever
2 Conventional type of abrasive
paper with pre-punched holes
3Pad
4 Punch plate
5 Conventional type of abrasive
paper without pre-punched
holes
6 Hook-and-loop type of
abrasive paper with
pre-punched holes
7 Pad for hook-and-loop type of
abrasive paper
8 Screws
9 Screwdriver
10 Groove
11 Front fixing cardboard
12 Paper dust bag
13 Claws
14 Upper part
15 Notch
16 Guide
17 Speed adjusting dial
18 Lock button
19 Switch trigger
SPECIFICATIONS
Model BO4900V BO4900 BO4901
Pad size ......................................................... 115 mm x 229 mm 115 mm x 229 mm 115 mm x 229 mm
Abrasive paper size ....................................... 115 mm x 280 mm 115 mm x 280 mm 115 mm x 280 mm
Orbits per minute (min
–1
)................................ 4,000 – 10,000 10,000 10,000
Sanding stroke rate (min
–1
) ............................ 8,000 – 20,000 20,000 20,000
Overall length ................................................ 289 mm 289 mm 289 mm
Net weight ...................................................... 2.8kg 2.8kg 2.8kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
ADDITIONAL SAFETY RULES
ENB042-3
1. Hold the tool firmly.
2. Do not leave the tool running. Operate the tool
only when hand-held.
3. This tool has not been waterproofed, so do not
use water on the workpiece surface.
4. Ventilate your work area adequately when you
perform sanding operations.
5. Some material contains chemicals which may be
toxic. Take caution to prevent working dust inha-
lation and skin contact. Follow material supplier
safety data.
6. Always use the correct dust mask/respirator for
the material and application you are working
with.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Installing or removing abrasive paper
CAUTION:
Always be sure that the tool is switched off and
unplugged before installing or removing the abrasive
paper.
For conventional type of abrasive paper with pre-
punched holes (standard equipment):
Turn the clamp lever counterclockwise. Insert the paper
end into the clamper, aligning the holes in the paper with
those in the pad. Then return the clamp lever to the origi-
nal position to secure the paper. Repeat the same pro-
cess for the other end of the tool, maintaining the proper
paper tension. (Fig.1)
For conventional type of abrasive paper without pre-
punched holes (optional accessory):
Turn the clamp lever counterclockwise. Insert the paper
end into the clamper, aligning the paper edges even and
parallel with the sides of the base. Then return the clamp
lever to the original position to secure the paper. Repeat
the same process for the other end of the tool, maintain-
ing the proper paper tension. Place the punch plate
(optional accessory) over the paper so that the guide of
the punch plate is flush with the sides of the pad. Then
press the punch plate to make holes in the paper.
(Fig. 2)
For hook-and-loop type of abrasive paper with pre-
punched holes (optional accessory):
Remove all dirt or foreign matter from the pad. Attach the
paper to the pad, aligning the holes in the paper with
those in the pad. (Fig. 3)
CAUTION:
Never use pressure-sensitive abrasive paper.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita bo4900v at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita bo4900v in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita bo4900v

Makita bo4900v User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info