598387
3
Zoom out
Zoom in
Previous page
1/228
Next page
3
SPECIFICATIONS
*Note:
In consequence of operating conditions, environments and the hours of operation, outlet pressure is changed.
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
GLOSSARY
CUT-IN PRESSURE:
While the motor is off, air tank pressure drops as you
continue to use your accessory or air tool. When the tank
pressure drops to certain level the motor will restart
automatically. This is called “cut-in pressure”.
CUT-OUT PRESSURE:
When you turn on your air compressor, it begins to run, air
pressure in the tank begins to build. It builds to a certain
pressure before the motor automatically shuts off -
protecting your air tank from pressure higher than its
design rating. The pressure at which the motor shuts off is
called “cut-out pressure”.
IMPORTANT
Read the Safety Guidelines and ALL instructions carefully
before operating.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
........... Read instruction manual.
........... Risk of electric shock
Caution: before doing any work on the
Model AC320H
Voltage-Single Phase 220 - 240 V AC
Rated current 7 A
Hz 50 Hz ± 1 Hz
Motor Power 2 HP
MAX Motor RPM 2,500 min
-1
Cut-in Pressure 2.7 - 3.1 MPa (27 - 31 bar)
Cut-out Pressure 3.5 MPa (35 bar)
SCFM @ 100 PSIG (L/min @ 6.9 bar)* 4.4 (124 L)
SCFM @ 330 PSIG (L/min @ 23 bar)* 3.6 (102 L)
Bore x Stroke x Qty
62 mm x 26 mm x 1
41 mm x 10 mm x 1
Tank Size 5.5 L x 2
Weight 18 kg
Dimensions (L x H x W) 558 x 350 x 358 mm
Lubrication Oil-Less
Protective earthing Class I
Protective structure IP 20
Working temperature 0°C to +40°C
Working humidity 85% RH or less. No dew condensation.
Height above sea level Up to 2,000 m
Storage temperature -10°C to +50°C
Storage humidity 85% RH or less. No dew condensation.
Outlet Max Pressure “HP”
(Exclusively for High Pneumatic Use)
2.45 MPa (24.5 bar)
Outlet Max Pressure “RP”
(Exclusively for Regular Pneumatic Use)
0.88 MPa (8.8 bar)
Noise
Sound Pressure Level (L
pa
)
Sound Power Level (L
wa
)
Uncertainty K
65.2 dB (A)
85.2 dB (A)
0.85 dB (A)
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per minute; a unit of measure
of air delivery.
PSIG: Pounds per square inch gauge; a unit of measure
of pressure.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita AC320H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita AC320H in the language / languages: All languages as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita AC320H

Makita AC320H User Manual - English, Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info