78477

Makita 6906 Manual

4
Zoom out
Zoom in
Previous page
1/7
Next page
4
ENGLISH
Explanation of general view
1 Socket
2 Anvil
3 Counterclockwise
4 Reversible switch
5 Clockwise
6 Limit mark
7 Screwdriver
8 Brush holder cap
SPECIFICATIONS
Model 6905B 6906
Capacities
Bolt size ....................................................................................12 mm – 20 mm 16 mm – 22 mm
Square drive .............................................................................12.7 mm 19 mm
Impacts per minute ......................................................................2,000 1,600
No load speed (min
–1
) .................................................................1,700 1,700
Tightening torque ........................................................................3,000 kg•cm 6,000 kg•cm
Overall length ..............................................................................270mm 327 mm
Net weight ...................................................................................2.7 kg 5.0 kg
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
ADDITIONAL SAFETY RULES
FOR TOOL
1. Wear ear protectors.
2. Check the socket carefully for wear, cracks or
damage before installation.
3. Hold the tool firmly.
4. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
5. The proper tightening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
OPERATING INSTRUCTIONS
Holding the tool
Hold the tool firmly with one hand on the gripping part of
the tool and the other hand on the side grip when per-
forming the tool.
Selecting correct socket
Use a correct size socket for bolts and nuts. A wrong size
socket will result in inaccurate and inconsistent tightening
torque.
Installing the side grip (Fig.1)
For 6906 only
Fit the side grip into the groove on the middle of the ham-
mer case and fasten securely.
Attaching the socket (Fig. 2)
Selecting a proper socket in size, please insert it into the
anvil so as to fix securely.
Switch action (Fig. 3)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released.
• Change the direction of rotation only after the tool
comes to a complete stop. Changing it before the tool
stops may damage the tool.
The switch is reversible, providing either clockwise or
counterclockwise rotation. To start the tool, simply pull
the lower part of the switch for clockwise, the upper part
for counterclockwise. Release the switch to stop.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 6906 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 6906 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info