690946

Makita 4093D Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
Cleaning (Suction)
Nozzle (Fig. 4)
Attach the nozzle to clean off tables, desks, furniture,
etc. Nozzle slips on easily.
Nozzle + Extension wand (Straight pipe) (Fig. 5)
The extension wand fits in between the nozzle and
the cleaner itself. This arrangement is convenient for
cleaning a floor while standing erect.
Corner nozzle (Fig. 6)
Fit on the corner nozzle for cleaning corners and
crevices of a car or furniture.
Corner nozzle + Extension wand (Straight pipe)
(Fig. 7)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
Cleaning without nozzle (Fig. 8)
You can pick up powder and dust without nozzle.
Dust disposal
CAUTION:
Empty the cleaner before it becomes too full, or the
suction force weakens.
Depress the buttons and open the front cover. (Fig. 9)
Take the dust bag out of the cleaner carefully so that
the contents will not spill out. Empty the contents out
of the dust bag. (Fig. 10)
Also empty out the dust inside the cleaner itself.
Failure to do so may cause the sponge filter to be
clogged or the motor to be damaged. (Fig. 11)
Installing dust bag
Place the dust bag into the cleaner cavity. (Fig. 12)
Insert the holder of the dust bag all the way into the
slots in the cleaner cavity. (Fig. 13)
CAUTION:
Forgetting to install the dust bag, failure to insert the
holder of the dust bag all the way into the slots or
using a broken or ripped bag, may allow dust to get
into the motor. This may result in motor failure.
Hook the front cover onto the front lip of the cleaner.
Then close the front cover. (Fig. 14)
NOTE:
•
When installing the paper pack, follow the same
procedures for the dust bag.
•
Always unfold a new paper pack before installing it
on the cleaner.
MAINTENANCE
CAUTION:
Always be sure that the cleaner is switched off before
carrying out any work on the cleaner.
After use (Fig. 15)
When storing the cleaner, hang it from a nail using the
convenient hanger in back.
Cleaning (Fig. 16)
From time to time wipe off the outside (cleaner body)
of the cleaner using a cloth dampened in soapy water.
Never use gasoline, thinner or the like. Discoloration
or cracks may result.
Wash the dust bag in soapy water occasionally. Dry it
out thoroughly before use. An insufficiently dried bag
may cause poor suction and shorten the service life of
the motor.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by a
Makita Authorized Service Center.
4093D (E) (’100. 4. 12)
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita 4093D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita 4093D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info