494167
7
Zoom out
Zoom in
Previous page
1/33
Next page
Supplied Accessories
Owner’s Manual Quick Start Guide
Quick
Star t
Registration card
IMPORTANT
Remote Control and
batteries
(AAA, 1.5V x 2)
AAA
AAA
TV base and 4 screws (M4 x 20)
Note
If you lose the screws, please purchase (M4 x 20) Phillips head
screws at your local store.
If you need to replace these accessories, please refer to the part
name or No. with the illustrations and call our toll free customer
support line found on the cover of this manual.
When using a universal remote control to operate this unit.
Make sure the component code on your universal remote control
is set to our brand. Refer to the manual accompanying your
remote control for more details.
We do not guarantee 100% interoperability with all universal
remote controls.
Symbols Used in this Manual
The following is the description for the symbols used in this
manual. Description refers to:
ATSC
: Digital TV operation
NTSC
: Analog / Cable TV operation
If neither symbol appears, the operation is applicable to
both.
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction. At least 2 people are required for these steps.
1 Check the text FRONT” with arrow“ on the Base’s
bottom to ensure it is being installed in the correct
direction. Spread a thick and soft cloth over a table as shown
at step 2. Place the main unit face down onto it. Make sure
not to damage the screen.
2 Insert 2 hooks under
the bottom of the main
unit into base holes
(shown by arrow
),
then move the base in
the direction as shown
by arrow
until it
stops and the screw
holes are aligned.
FRONT
Make sure not to put the AC power cord between the
base and the unit.
3 Drive Phillips head
screws into the 4
threaded holes at the
bottom of the base until
they are tight.
To remove the base from this unit
Unscrew the Phillips head screws in step 3.
After the screws are removed, pull the base up toward the
rear
of
the unit. Be careful not to drop the base when you remove it.
Note
When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the
unit to fall, resulting in injuries as well as damage to the unit.
Make sure to use a table which can support the weight of this unit
and is larger than this unit.
Make sure the table is in a stable location.
When attaching the base, ensure that “FRONT”
with “arrow”
written on the bottom of the base is
downward
. If it’s not
downward
, the
2 hooks don’t
t into the base.
Mounting the Unit on Your Furniture
Screw this unit on your furniture tightly using wood screws
(not supplied) in the 2 holes at the back of the base as shown.
Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
screw holes
rear of this unit
Note
When you remove this unit make sure to unscrew the wood
screws from your Wood Stand, Furniture and other wood item.
7
INTRODUCTION
PREPARATION
WATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMATION
English
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 26MF321B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 26MF321B in the language / languages: English as an attachment in your email.

The manual is 10,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info