494150
29
Zoom out
Zoom in
Previous page
1/33
Next page
29
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONS
USEFUL TIPS
CONNECTING DEVICES
INFORMATION
English
Symptom Remedy
No picture or sound
Check if the power is on.
Check if the correct input mode is selected.
Check whether all the cables to the unit are connected to the correct output jack of your device like
Blu-ray / DVD recorder.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn on
the unit again.
Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
Make sure that the selected input mode is connected to the working input jack.
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode. Tap
any key on the keyboard to wake up your computer.
Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level
will appear on the TV screen.
Make sure that the volume is NOT set to [
0
] or [Mute]. If so, use VOL + / to adjust the desired
volume.
No color
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
• Adjust [Color] in the main menu.
Adjusted [Picture] or [Sound]
settings are not effective every time
the unit is turned on.
You must set [Home] in [Location].
p. 23
Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.
Sound OK, picture poor
Electrical interference from nearby appliances may affect picture quality.
• Adjust [Contrast] and [Brightness] in the main menu.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
For the best picture quality, watch "High Definition" wide screen programs.
If the HD content is not available, watch "Standard Definition" programs instead.
Picture OK, sound poor
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
Check if the audio cable is connected in correctly.
You see a distorted picture or hear
an unusual sound.
You may be getting interference from electrical appliances, automobiles, motorcycles or uorescent
lights.
Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture
Electrical interference from nearby appliances may affect picture quality.
View other TV channels. The problem might be limited to the broadcasting station or weak signal
strength.
You see "noise" or "trash" on the
screen.
When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will be
increased to match the capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV
screen
View other TV channels. The problem might be limited to the broadcasting station, missing data or
pixelation.
You switch to a different input and
the volume changes.
This unit will memorize the volume level from the last time you adjusted it.
If the volume of the sound from another device is higher or lower, then the loudness will change.
You switch to a different input and
the screen size changes.
This unit will memorize the viewing mode from the last time you used the particular input modes.
The display image does not cover
the entire screen.
If you are using the unit as a PC monitor, make sure that [Horizontal Position] and [Vertical Position]
in [PC Settings] are set correctly.
If you are watching TV or using the Composite Video, Component Video or HDMI with 480i Input,
press FORMAT repeatedly to switch various screen modes.
Captions are displayed as a white
box. No caption is displayed in
the Closed Caption-supported
program.
Interference from buildings or weather conditions may cause captioning to be incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened program.
Black box is displayed on the TV
screen.
The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].
Note
The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a xed point of blue,
green or red.
This is not to be considered a defect in the LCD screen.
Some functions are not available in speci c modes, but this is not a malfunction. Read the description in this manual for more details on
correct operations.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Magnavox 22ME601B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Magnavox 22ME601B in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info