677418
10
Zoom out
Zoom in
Previous page
1/12
Next page
- 9 -
Bluetooth mode
Pairing
The bluetooth of this radio is always in standby mode for pairing and connection, signalled by a
blinking bluetooth icon on the LCD Display. At this blinking time, please run the bluetooth search
and connect function in your cellphone. The car radio model no “M-DL3200D” will be shown on the
cellphone. Select this car radio and connect to finish the pairing. The bluetooth icon on the display
will be on indicating that the connection is established. Bluetooth function is ready to use. *Pairing
password is required in some phones. Insert “0000” in such case.
Calling
In any play mode, dial the desired number on your cellphone. The unit will switch to bluetooth
handsfree mode automatically. “CALL OUT” will be shown on the display indicating the dialling is
in progress.
Answer calls
When there is an incoming call, the LCD will display the CALL IN prompt followed by the caller
number display. At this time, after pressing the “answer button”, the current talk time status
will be displayed. Rotate the volume knob during ringing or conversation to adjust the respective
volume level.
Rejecting calls
During ringing or conversation, press the “EJECT” button to end the call or reject the call. “CALL
END” will be shown on the display and the unit will resume to the original play mode.
BT Audio streaming (A2DP)
Press MOD/(with green phone logo) button until the unit entered BT AUDIO.
BT audio will play automatically when you play the song in the cellphone.
You could pause by “
> / II
” button, to choose previous or next song by pressing
|<<
and
>>|
button.
Disconnecting
Disconnect the paired phone by operating on the cellphone. You cannot process disconnection on
the car radio headunit.
Setting
Illuminations
The RGB menu has the following illuminations LED modes:
(AUTO)
>
(WHITE)
>
(PURP)
>
(CYAN)
>
(YELL)
>
(RED)
>
(BLUE)
>
(GREE).
(Factory default is LED AUTO). Press VOL knob repeatedly to enter the menu LED AUTO.
Rotate VOL to choose the color of your favorite light.
Steering Wheel Control
Press the volume knob repeatedly until the display shows SWRC. Rotate the volume knob to see
(MODE)
>
(VOL+)
>
(VOL-)
>
(MUTE)
>
(SEEK UP)
>
(SEEK D)
>
(EJECT)
>
(ACCEPT),
which represents different functions of the radio. In each function, press the volume knob to enter
SWC learning, for example, press the volume knob when the display shows MODE.
When PAIR is shown, press and hold the desired button in the steering wheel until display shows
PAIR OK. Proceed to the next function until all desired functions are set.
Note:
During the SWC setup, if the unit is idle for 5 seconds, the unit will return to the main GUI and user
has to repeat the above actions again.
M-DL3200D User manual_ENG.indd 9 23/07/2018 15:31:56
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Macrom M-DL3200D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Macrom M-DL3200D in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info