606033
20
Zoom out
Zoom in
Previous page
1/22
Next page
20
403002-04-05-07-08-09-10_en_ma_2011
TROUBLESHOOTING AND REMEDIES
The table below indicates the most common problems that may arise during
slicing and the necessary remedies.
PROBLEM POSSIBLE CAUSE REMEDY
The machine does not start
when the green button is
pressed
No power supply
The blade guard is not
correctly positioned.
Defective electrical control
circuit.
Ascertain that the plug is is
correctly inserted.
Check
Call technical assistance
The machine does not
start, and there is
continuous noise like a
buzz (only in the case of
machines equipped with
three-phase motors.
The motor is running on
single-phase mode
Press the red button
immediately and have the
power supply cord and the
circuits upstream verified
by qualified personnel.
When the green button is
pressed, the machine stats,
but the white functioning
light is not on.
Defective indicator Do not use the machine
when the pilot lamp is not
on. Call technical
assistance
The machine starts, but
there are vibrations. The
motor is very hot and there
is a bad smell.
Defective motor or
transmission.
Do no use the machine.
Call technical assistance.
Under strain, the machine
slows down or comes to a
stop.
Defective transmission Call technical assistance
Excessive resistance to
product slicing.
The blade is blunt Sharpen the blade
The slices are ragged
and/or shaped irregularly
The blade is blunt
The blade is excessively
worn out
Sharpen the blade
Call technical assistance
Unsatisfactory blade
sharpening
Worn wheels Replace the wheels. Call
technical assistance
The product trayu does not
slide
Guides are insufficiently
lubricated
Lubricate
When the red button is
pressed, the machine does
not stop
Defective electrical control
circuit
Stop the machine, unplug
from mains and call
technical assistance
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mach 403.009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mach 403.009 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info