782306
5
Zoom out
Zoom in
Previous page
1/26
Next page
04
MTSP800A by MAC ALLISTER Technical and legal
information
Getting started...
Technical data
Voltage:230-240V~50Hz
Rated input:800W, S2:10min
Protection class: I
Degree of protection: IP20
No load speed:2950min-1
Carbide saw blade200 x 30 x 2,4mm
Table size:505 x 335mm
Cutting height max. 90°:45mm
Cutting height max. 45°:27mm
Connector for dust extractor:dia. 24mm
Weight:11kg
Thickness of riving knife:2,2mm
Bevel angle range:0 -45º
Noise and Vibration Data
A weighted sound pressure KpA :.........96.6dB(A)
A weighted sound power KwA :.............109.6dB(A)
Uncertainty K
Vibration level:.......................................2.5 m/s2
Uncertainty K:.......................................1.5m/s2
wA :..................................3dB
Uncertainty KpA :...................................3dB
The declared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment
of exposure.WARNING: The vibration emission during actual use of the power
tool can differ from the declared total value depending on the ways in which the
tool is used. The need to identify safety measures and to protect the operator are
based on an estimation of exposure in the actual conditions of use (taking account
of all parts of the operating cycle, such as the times the tool is switched off, when it
is running idle, in addition to trigger time).
Load factor:
A load factor of S2 10 min(temporary duty)means that you may operate the
motor continuously at its nominal power level (800W) for no longer than the
time stipulated on the specifications label (10minutes ON period). If you fail to
observe this time limit the motor will overheat. During the OFF period the motor
will cool again to its starting temperature.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MTSP800A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MTSP800A in the language / languages: English as an attachment in your email.

The manual is 3.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info