782325
5
Zoom out
Zoom in
Previous page
1/60
Next page
Getting started...
05
Technical specifications
General
> Input Voltage
> Power Input
> No Load Speed
> Degree of Protection
> Blade Size
> Main Table Size
> Extension Table Size (left/right)
> Extension Table Size (rear)
> Blade Tilting Range
> Max. Cutting Capacity
> Net Weight
:
:
:
:
:
:
:
:
:
:
:
220-240V~50Hz
S1 1500 W
4500min-1
IP20
ø254mm × ø30mm × 2.8mm, 40T
554 × 540mm
115 × 540mm
554 × 118mm
0°~45°
80mm (0°) / 55mm (45°)
26.7kg
NOISE
A weighted sound pressure LpA.............................................................101.0dB(A)
A weighted sound pressure LWA............................................................114.0dB(A)
Uncertainty...................................................................................................3dB(A)
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
Through poor conditions of the electrical MAINS, shortly voltage drops can appear
when starting the EQUIPMENT. This can influence other equipment (e.g. blinking
of a lamp). The machine should only be connected to a supply having a system
impedance lower than 0.2496ohm, In case of need, you may contact your local
supply authority for further information.
Important note
Remove the mains plug from socket before carrying out any adjustment or
servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
The following information applies to professional users only but is good
practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
The updated Control of Substances Hazardous to Health Regulations 1st October
2012 now also targets to reduce the risks associated with silica, wood and gypsum
dusts.
Construction workers are one of the at-risk groups within this because of the dust
that they breathe: silica dust is not just a nuisance; it is a real risk to your lungs!
Silica is a natural mineral present in large amounts in things like sand, sandstone
MSTS1500-A by MacAllister Technical and legal
information EN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mac Allister MSTS1500-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mac Allister MSTS1500-A in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info