MHTP245-2 by MacAllister Technical and legal information
36
In more detail...
GB
IE
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time
of operation, use low-vibration and low-noise operating modes as
well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
Only use the product as intended by its design and these >
instructions.
Ensure that the product is in good condition and well >
maintained.
Use correct application tools for the product and ensure they in >
good condition.
Keep tight grip on the handles/grip surface. >
Maintain this product in accordance with these instructions and >
keep it well lubricated (where appropriate).
Plan your work schedule to spread any high vibration tool use >
across a number of days.
Emergency
Familiarise yourself with the use of this product by means of
this instruction manual. Memorise the safety directions and
follow them to the letter. This will help to prevent risks and
hazards.
Always be alert when using this product, so that you can >
recognise and handle risks early. Fast intervention can
prevent serious injury and damage to property.
Stop the engine and unplug the spark plug connector >
if there is any malfunction. Have the product checked by a
qualied specialist and repaired, if necessary, before you put it
into operation again.
In case of re stop the engine and unplug the spark plug >
connector. Take re-extinguishing measures immediately if the
product switch is no longer accessible.
Safety warnings
WARNING! Never use water to extinguish a product
on re. Burning fuel must be extinguished with special
extinguishing agents. We recommend that you keep a
suitable re extinguisher within reach in your work area!
