Manual M-System PRNF-960 (page 146 of 148) (English, German, Dutch, Spanish)

522607

146

Zoom out

Zoom in

1/148

146

REPLACEMENT OF THE ELECTRICAL

FEEDER CABLE

To connect the supply cable:

– Remove the screws securing the

cover “A” on the rear of the cooker.

– Feed the supply cable through the

cable clamp “D”. The supply cable

must be of a suitable size for the

current requirements of the appliance;

see the section “FEEDER CABLE

SECTION”.

– Connect the phase wires to the

terminal block “B” and the earth wire

to the terminal “PE” (fig. 9.1).

– Take up any slack in the cable and

secure with the cable clamp “D”.

– Replace the cover “A”.

FEEDER CABLE SECTION

Type “HO5RR-F”

230 V 3 x 1,5 mm

(*)

(*) – Connection possible with plug and outlet

230 V

PEN

(L2)

Fig. 9.2

Fig. 9.1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of M-System PRNF-960 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 4,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

M-System PRNF-960 Manual

Product: