743785

M-Locks MiniTech Manual

3
Zoom out
Zoom in
Previous page
1/18
Next page
Important instructions
• Before using the lock, please read the instructions for use carefully.
• The instructions for use only relate to the lock itself and not to how to operate the safe.
•Ensure that you only program the lock while the safe door is open.
•After changing the code, always try the code several times with the safe door open.
•Only after several positive function tests (opening / closing) the safe door may be closed.
•Each key entry is confirmed by an audible tone.
•You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad
during this period of 10 seconds, the entry procedure will automatically abort. You must then start
again from the beginning.
•After entering a valid code, a double signal sounds. An invalid entry will trigger a long tone.
•After entering an invalid code the first attempt, wait 20 seconds before entering the code again.
•If the code is entered incorrectly on four consecutive occasions, the keypad and the lock will be
disabled for 5 minutes. During this period, the LED will flash every 10 seconds and you will hear a
long tone when attempting to make an entry. Entering an incorrect code on two further occasions
after the keypad has been re-enabled will trigger a new keypad lock-out period of 5 minutes. After
entering a valid code you have four new occasions to enter the code and open the lock.
•The lock works with a six digit code. Preceded by a two digit ID number.
•At the time of delivery, the lock is set to the standard Manager Code of 123456. Change this code
immediately to your own choice of Manager Code. Do not use personal or other simple data which
can easily be found out for your Manager Code
•If needed, the owner of the Manager Code can add up to 48 codes / users. This code must be
immediately changed by the user in a code of their own choice. Do not use personal or other simple
data for your user code.
•Users 50 - 59 always have an override code. This means that they can always open immediately
after entering the first code, even if time delay has been activated.
•Please keep the code always carefully and protect it against improper use by unauthorized persons.
•When typing in your code cover the keypad so no one near you can see your code.
•Depending on the used lock / keypad and the way the lock is installed, there are several ways to
open and to close a safe. By example with a lever or by turning the keypad. Please contact your safe
supplier for more information about your specific situation.
Caution! Don’t forget your code, otherwise the lock can not be used anymore!
•The lock has been designed for use in a temperature range from +10˚C to +50˚C and a non-
condensing humidity range from 30% to 80%.
•It may only be cleaned with a moist cloth (do not use aggressive cleaning agents).
•The lock may only be installed by qualified fitters.
•The lock may not be lubricated.
•Never open the lock housing. If it is necessary to disassemble the hardware, only do so in
accordance with the technical instructions. If you fail to do so, the lock may no longer function
properly and you will forfeit your right to warranty.
Page 2 of 20 IU_MiniTech_03
M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
sales@m-locks.com - www.m-locks.com
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for M-Locks MiniTech at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of M-Locks MiniTech in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of M-Locks MiniTech

M-Locks MiniTech Additional guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info