The housing of the EuroClass entry unit combines an alpha-numeric membrane keypad with a pivot
handle. The 8x8 mm square shaft of the pull handle drives either the lock or a boltwork. The
integrated battery compartment opens with a slider and is located in the bottom of the unit. Cable
length is approximately 30cm.
DIMENSIONS / MOUNTING INSTRUCTION
The cable should be routed through a separate cable hole. The diameter of the cable hole should be
minimum 9mm, maximum 12mm. The spindle hole should be maximum Ø: 13mm. Both holes must
be de-burred well to avoid damage.
Cut the 8mm square shaft to an appropriate length. Make sure the shaft drives extends into lock or
boltwork properly. Affix the shaft with the provided screw in the handle and cover the screw with the
label. Route the cable through the cable hole. Push the shaft as shown above into the boltwork.
Lock and boltwork must be in the “OPEN” position.
Mount the unit with two M4 flathead screws. Connect one (1) battery to the battery clip.
Only use 9V Duracell Procell Alkaline or Energizer batteries.
*Acrylonitrile butadiene styrene, or ABS, (chemical formula (C8H8· C4H6·C3H3N) is a common thermoplastic
used to make rigid, moulded products.
EK5020
EK5040
EK5090
EK5025
EK5045
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for M-Locks EK5020 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of M-Locks EK5020 in the language / languages: English as an attachment in your email.
The manual is 0,49 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.