492304

Lyngbox LB-1ST Manual

3
Zoom out
Zoom in
Previous page
1/12
Next page
English
Look at the images (1 through 6) for guidance on where to connect
each cable. The numbers in the text correspond to the numbers on
the images.
1. Connect your satellite dish and terrestrial antenna to the
indicated connectors.
2. Connect your broadband Internet router to the Ethernet
interface of the LyngBox using an Ethernet cable.
3a. Depending on TV type LCD/Plasma: Connect an HDMI cable
between the LyngBox and the TV-Set.
3b. CRT: Connect a SCART cable between the LyngBox and the TV-
set.
4. Connect the LyngBox to a wall socket using the power cable.
5. Open the battery lid on the back of the remote control and
insert two AA-batteries.
6. Make sure the mains switch on the back of the LyngBox is set to
on (1).
This part of the quick-start guide describes how to configure the
LyngBox using the installation guide. It is assumed that that the
LyngBox is connected to the Internet. Look at the images (7 through
15) for visual guidance.
7. Press the LyngBox button on the remote control, and then press
the power button to start.
8. You will be presented with a welcome screen where you can
select language. Use the arrow buttons to navigate and the OK
button to confirm.
9. Select your country and a nearby city. If no nearby city can be
found in the list, enter your coordinates.
10. Select how your LyngBox receives its network configuration.
‘Automatic’ (from DHCP) can often be used.
11. Define what DiSEqC equipment you have, if any.
12. Select the size of your satellite dish.
13. Select type for each LNB, and which satellite it is directed
towards.
14. Select if you want to do a terrestrial channel search (if there is a
terrestrial antenna connected).
15. The LyngBox will synchronize its satellite channel lists with
LyngSat Maps and LyngSat and then search for terrestrial
channels.
Installation is now complete and you can start enjoying your new
LyngBox. Read the user manual for further assistance.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lyngbox LB-1ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lyngbox LB-1ST in the language / languages: English, German, Dutch, French, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lyngbox LB-1ST

Lyngbox LB-1ST User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info