EN - CAUTION: Always switch o mains supply before servicing.
Luminaire Installation:
- Shut OFF the power before installing the product.
- Before installing the product check which plugs and screws are best suited for
the intended surface
- Mount the bracket on the ceiling.
- Strip the wires, connect the cable with the connector, make sure the cable wires
are correct to connect with L, N and 1-marked earth wire.
- Mount the hood and tighten it firmly
- Turn on the power and test the luminaire
WARNING: This product must be earthed. If it becomes necessary to re-wire this
product please follow these guidelines. Always secure wires in plug terminals
carefully. Make sure the cable is firmly located in the cord grip. NEVER connect
the green & yellow wire to any terminal other than one marked with the earth
symbol
‘E’ or ‘ 1 ’. Regularly inspect all electrical connections and wiring for damage. Any
faults should be immediately rectified before further use of this product. Always
have the wiring and connections checked by a qualified electrician. In use, ensure
all wiring and extension cables are kept clear of any cutting tools, sharp objects
and any other potential hazard such as wet floors, chemicals, solvents etc.
NL - LET OP: Schakel altijd de netvoeding uit voordat u onderhoud pleegt.
Armatuur Installatie:
- Schakel de stroom UIT voordat u het product installeert.
- Controleer voordat u het product installeert welke pluggen en schroeven het
meest geschikt zijn voor de beoogde ondergrond
- Monteer de beugel aan het plafond.
- Strip de draden, verbind de kabel met de connector, zorg ervoor dat de
kabeldraden correct zijn om te verbinden met L, N en 1-gemarkeerde
aardedraad.
- Monteer de kap en draai hem stevig vast
- Schakel de stroom in en test de armatuur
WAARSCHUWING: Dit product moet geaard zijn. Als het nodig is om dit product
opnieuw te bedraden, volg dan deze richtlijnen. Zet de draden altijd zorgvuldig
vast in de aansluitklemmen. Zorg ervoor dat de kabel stevig in de snoergreep zit.
Sluit de groene en gele draad NOOIT aan op een andere terminal dan een die is
gemarkeerd met het aardesymbool 'E' of ' 1 '. Inspecteer regelmatig alle
elektrische aansluitingen en bedrading op schade. Eventuele gebreken moeten
onmiddellijk worden verholpen voordat dit product verder wordt gebruikt. Laat
de bedrading en aansluitingen altijd controleren door een gekwalificeerde
elektricien. Zorg er tijdens het gebruik voor dat alle bedrading en verlengkabels
vrij zijn van snijgereedschap, scherpe voorwerpen en elk ander potentieel gevaar
zoals natte vloeren, chemicaliën, oplosmiddelen enz.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for LSC Smart Connect 5325000300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of LSC Smart Connect 5325000300 in the language / languages: English, Dutch as an attachment in your email.
The manual is 0.57 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.