744807
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
EN
Installation instructions
Please read the Safety Instructions first.
1. Clean the surface
2. Measure the desired lenght
3. Cut to size
4. Peel o protective foil
5. Stick the strip in place
6. Connect strip to the controller
7. Use screws or tape to mount the controller to any
surface (1)
8. Connect controller to the DC adapter (2)
Package content
Led strip, 5 meter; Screws: x2 included; Plugs: x2 inclu-
ded; 1 pcs 3M tape; Battery (CR2025 - 3,3 Volt Button);
Remote control; Controller; Adapter
Specifications:
220-240 VAC / 50 - 60 Hz, Max. Power 24W
IP20 (indoor use only)
Intended use: indoors as additional (party) lighting
Dispose in a controlled manner for recycling
Remote control instructions
The remote control uses a CR2025-3.3V button battery.
The remote control is on automatic standby mode when
not in use. Normally the battery can be used for more
then six months. The battery can be replaced by the
same type. The remote control keys can be divided into
three parts.
NL
Installatie instructies
Lees eerst de veiligheid instructie.
1. Maak het oppervlak schoon
2. Meet de gewenste lengte
3. Knip de gewenste lengte af
4. Verwijder de beschermfolie
5. Plak de strip op zijn plek
6. Verbind de strip met de controller
7. Gebruik de schroeven of de 3M plakstrip om de
controller vast te zetten (1)
8. Verbind de controller met de DC adapter (2)
Verpakkingsinhoud
Led strip, 5 meter; Schroeven: 2x, meegeleverd; Plug-
gen: 2x, meegeleverd; 1 stk 3M tape; Batterij (CR2025 -
3,3 Volt Knoop); Afstandsbediening; Controller; Adapter
Specificaties
220-240 VAC / 50 - 60 Hz, Max. Wattage 24W
IP20 (gebruik binnen)
Gebruik: binneshuis als additionele (feest-) verlichting
Gooi het product weg op een verandwoorde wijze voor
hergebruik
Instructies afstandsbediening
De afstandbediening werkt op een knoop batterij
(CR2025 - 3,3 Volt). Wanneer de afstandbediening niet
in gebruik is staat deze automatisch op stand-by mo-
dus. De levensduur van de batterij bij normaal gebruik
is ten minste zes maanden. De batterij kan vervangen
worden door een gelijk type. De functie toetsen van
de afstandsbediening kan worden opgedeeld in drie
delen.
DU
Bedienungsanleitung
Bitte lesen Sie zuerst die Sicherheitshinweise
1. Reinigen Sie die Oberfläche
2. Messen Sie die gewünschte Länge
3. Auf die gewünschte Länge zuschneiden
4. Ziehen Sie die Schutzfolie ab
5. Kleben sie den Streifen fest
6. Verbinden Sie den Streifen mit dem Controller
7. Verwenden Sie Schrauben oder Klebeband um
den Controller auf einer beliebigen Oberfläche zu
befestigen (1)
8. Verbinden Sie den Controller mit dem DC Adapter (2)
Verpackungsinhalt
LED Streifen, 5 meter; Schrauben: 2x im Lieferumfang
enthalten; Stecker: 2x im Lieferumfang enthalten; 1 pcs
3M tape; Batterien: 1x CR2025 - 3,3V im Lieferumfang
enthalten; Fernbedienung; Controller; Adapter
Spezifikationen
220-240V / 50 - 60 Hz / max. 24W
IP20 (ausschließlich für den Innenbereich)
Verwendungszweck: Innenbereich als zusätzliche
(Party-) Beleuchtung
Bitte Ordnungsgemäß entsorgen
Anweisungen zur Fernbedienung
Die Fernbedienung funktioniert mit einer Konpatterie
CR2025-3,3V die im Lieferumfang enthalten ist. Die Fern-
bedienung befindet sich im automatischen Standby-Mo-
dus wenn sie nicht verwendet wir. Erfahrungsgemäß
lt der Akku länger als sechs Monate. Die Batterie kann
durch denselben Typ ersetzt werden. Die Fernbedienung-
stasten können in drei Teile unterteilt werden.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

lsc-smart-connect---action-smart-strip-light-970750

Reset search

  • I just bought it it Worked yesterday but i cant conected is Submitted on 10-10-2023 at 05:30

    Reply Report abuse
  • Comment connecté à sont téléphone c'est bande de lumière ? Submitted on 23-11-2021 at 18:58

    Reply Report abuse
  • Comment connecté c'est bande de lumière a sont téléphone
    Submitted on 23-11-2021 at 18:56

    Reply Report abuse
  • Comment connecté mon téléphone a ma bande de lumière
    Submitted on 23-11-2021 at 18:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LSC Smart Connect - Action Smart Strip Light 970750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LSC Smart Connect - Action Smart Strip Light 970750 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info