599448
11
Zoom out
Zoom in
Previous page
1/12
Next page
11
Powering the LSS-1
The LSS-1 power cable has four wires; red (+), black (–), yellow and blue. The
red wire is positive, the black wire is the ground and the yellow wire connects to a
switch. The blue wire will not be used. Cut it ush and cover the end with a wire nut
or electrical tape.
Connecting LSS-1 to display unit/ethernet network
The LSS-1 has three ethernet ports allowing you to connect it to up to three HDS
units. It can also be connected to an ethernet hub, like the NEP -1.
The LSS-1 comes with a 15 feet ethernet cable, but cable lengths of 6, 15, 25 and 50
feet may be purchased separately.
Black wire
(to negative)
Blue wire
(not used)
Red wire, fused
(to positive)
LSS-1
Power Cable
Yellow wire
(to positive)
Switch (at console)
Fuse and
fuse holder
12 Volt battery
LSS-1 Power Cable connections
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance StructureScan Sonar Imaging at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance StructureScan Sonar Imaging in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lowrance StructureScan Sonar Imaging

Lowrance StructureScan Sonar Imaging User Manual - English - 24 pages

Lowrance StructureScan Sonar Imaging User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info