23265
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
LST-3800 cable connections.
In the configuration above, the unit is always on. It will draw 11 milli-
amps of current with the backlight off and 40 milliamps with the back-
light on full brightness. Typically, the maximum recommended current
load on a boat in storage is about 50 milliamps. A battery will self dis-
charge at a rate of about 9 milliamps. A battery's normal discharge plus
the gauge current (lights off) amounts to approximately 20 milliamps,
well below the recommended load limit in storage.
To automatically have the gauge backlights turn on when you turn on the
other dashboard lights, connect the red dash light wire to the switch con-
trolling the dash lights.
If you want to turn off the gauge when your not using it, connect the red
wire from the power/transducer cable to your boat's accessory switch, or
install an optional switch between the unit and the power source. See the
following figure.
This wire configuration lets you turn off the gauge when it's not in use.
12 volt
battery
Red to dash
light switch
Black
wire
LST 3800 housing
Red wire
and fuse
Buzzer
Buzzer red wire
to boat power
LST black wire to
buzzer black wire
Accessory
switch
Power/transducer
cable
Black
wire
Red wire
and fuse
12 volt
battery
Transducer
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance LST3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance LST3800 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info