599460

Lowrance EP-90R Pressure Manual

4
Zoom out
Zoom in
Previous page
1/32
Next page
4
3. Slide the pressure hose onto the EP-90R hose barb attachment. If it
does not fit snugly, secure it with a zip tie at the base of the hose barb
attachment.
4. Now you are ready to remove the speedometer. Refer to the
speedometer’s installation manual for removal instructions.
5. The EP-90R is ready to be connected to NMEA 2000 network. If the
NMEA 2000 network backbone is in another part of the boat, the EP-
90R can be linked to the display unit at the console — if one is present
— or either of the LMF digital gauges by using the T connector that
was included in the packaging. If the network backbone is near the
console, connect the EP-90R red male connector to a T connector in the
desired location on the network backbone. The EP-90R is ready for use.
The rest of this document contains detailed information on connecting
to a NMEA 2000 network.
Installing the EP-90R to measure other data:
Follow this installation to monitor the following data: Atmospheric
Pressure, Engine Boost Pressure, Engine Oil Pressure, Engine Water
Pressure, Fuel Pressure and Transmission Oil Pressure.
NOTE:
Make sure the pressure hose has enough slack to be attached to the
pressure sensor when the EP-90R is connected to the NMEA 2000
backbone.
1. Slide the (Atmospheric, Engine Boost, Engine Oil, Engine Water,
Fuel or Transmission Oil) pressure hose onto the EP-90R hose barb
attachment. Attach a zip tie or hose clamp at the base of the hose barb
attachment.
2. The EP-90R is ready to be connected to NMEA 2000 network. If the
NMEA 2000 network backbone is in another part of the boat, the EP-
90R can be linked to the display unit at the console — if one is present
— or either of the LMF digital gauges by using the T connector that
was included in the packaging. If the network backbone is near the
console, connect the EP-90R red female connector to a T connector in
the desired location on the network backbone.
Connecting to a NMEA 2000 Network
A NMEA 2000 network is a communications link between two or more
devices that transfer NMEA 2000 information. A NMEA 2000 network
functions like the phone wiring in a house. If, for example, you pick up
a phone in the living room you will be able to hear the conversation
someone is having on a phone in the bedroom.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance EP-90R Pressure at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance EP-90R Pressure in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info