599454
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
Next, attach the positive red lead to the sending unit's positive connector,
usually located in the center of the mounting plate. Connect the negative
black lead to the sending unit's negative connector. To be sure which
connection is which, refer to the mounting instructions that came with the
sending unit.
Connect wire leads to fluid level sending unit. This is a typical sending
unit mounting bracket. The center threaded post is + and the blade is – .
Finally, connect the blue locking collar connector to the NMEA 2000 network.
Route the sensor's cable connector to the T on the network backbone where
you intend to attach it, and plug it in. The sensor is ready to use.
Connecting to a NMEA 2000 Network
A network bus is an installed and operational network cable (backbone)
running the length of your boat, already connected to a power supply and
properly terminated. Such a bus provides network connection nodes at
various locations around your boat.
This is similar to the telephone wiring in a house. If you pick up a phone in
your living room, you can hear someone talking into the phone in the
bedroom.
Network Nodes
A network bus is built of network nodes spread along a backbone. Network
nodes are made by fitting T-shaped connectors into the backbone (using the
sockets on the sides), and attaching a display unit or sensor at the bottom of
the T.
Using our telephone example, the T connectors are similar to telephone
jacks. The backbone is like the phone wiring running through a house.
Negative
connector
Positive
connector
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lowrance EP-15 Fluid Level at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lowrance EP-15 Fluid Level in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info