704496
1
Zoom out
Zoom in
Previous page
1/2
Next page
CHARACTERISTICS
1. Analogue & digital time displays: Hour,
Minute, Second, Month, Date and Day of the
week.
2. Daily alarm and hourly chime: The alarm
can be set to sound at the designated time
on a 24-hour basis and the chime can be set
to sound every hour on the hour with a single
beep.
3. Stopwatch: The stopwatch can measure
up to 23 hours 59 minutes and 59 seconds
in 1/100-second increments. Split time
measurement is available.
4. Selection of 12 or 24-hour format: The time
display format in either 12-hour indication or
24-hour indication can be selected.
5. EL backlight: The built-in electro-luminescent
(EL) backlight illuminates the display for easy
viewing in darkness.
DISPLAY AND BUTTON FUNCTION
SETTING THE TIME (ANALOGUE)
1. Pull the crown out one step, the second hand
will stop.
2. Set the correct time by turning the crown.
3. Push the crown back to the original position.
The watch will start running again.
* The analogue indication and digital display of
the time setting can be adjusted separately.
Z021
Z026
NREZ021C
1-2019
CAL. Z021 (RW6 SERIES)
CAL. Z026 (R2B SERIES)
CROWN
HOW TO SET TIME/CALENDAR
1.
From NORMAL TIME mode, p
ress S3 button
three times to begin setting procedure.
The second digits start flashing.
2. Press S1 button to reset the second digits to
zero.
* If S1 button is pressed when the second digits
are in a range between 30 and 59, the second
digits will be reset to 00 and one minute will be
added. If S1 button is pressed when the second
digits are in a range between 00 and 29, the
second digits will be reset to 00 and the minute
digits will be unchanged.
3. Press S2 button to move on to HOURS setting.
* Selection of the digits to be adjusted is made in
the following order by pressing S2 button. Press
S1 button to adjust the value.
* When setting HOURS, “H” stands for 24-hour
format, A or “P” stands for 12-hour format.
SECONDS
DATE
DAY OF
THE WEEK
MONTH
MINUTESHOURS
S2
S2
S2
S2
S2
12/24H-
FORMAT
S2
S4 (LIGHT)
HOURS
DAY OF WEEK
CHIME
DATE
MINUTES
SECONDS
ALARM
S3 (MODE)
S2 (RESET)
MONTH
S1(START/STOP)
S3
HOW TO SET ALARM TIME
HOW TO CHANGE THE DISPLAY
MODE
STOPWATCH mode
1. From NORMAL TIME mode,
press S3 button
twice to enter the ALARM mode.
2. Press S2 button to begin setting procedure.
The hours digit starts flashing.
3. Press S1 button to set HOURS setting.
4. Press S2 button to move on to MINUTES setting.
Press S1 button to set MINUTES setting.
5. Press S2 button to confirm the settings.
6. Press S3 button to return to NORMAL TIME
mode.
*
Press S3 button to show the
NORMAL TIME
mode.
* If the NORMAL TIME mode is shown already on
the display, skip the above operation.
* Press S3 button to change the display mode in
the following order.
NORMAL TIME mode
S3
ALARM mode
S3
S3
S2
HOURS SETTING BY
PRESSING S1
MINUTES SETTING BY
PRESSING S1
S2
TIME SETTING mode
ALARM modeNORMAL TIME mode
S3
PRESS
S3
twice
S2
for confirmation
4. Press S3 button after completing the setting.
NORMAL TIME
MINUTES SETTING BY
PRESSING S1
HOURS SETTING BY
PRESSING S1
SECONDS SETTING
BY PRESSING S1
PRESS
S3
3 times
S2
S2
MONTH SETTING BY
PRESSING S1
DATE SETTING BY
PRESSING S1
S3
S2
DAY OF WEEK SETTING
BY PRESSING S1
S2
S2
S2
S4 (LIGHT)
HOURS
DAY OF WEEK
DATE
MINUTES
SECONDS
ALARM
S3 (MODE)
S2 (RESET)
S1(START/STOP)
MONTH
CHIME
NREZ021C.indd 1 2018/12/06 14:53
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z026 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info