593920
1
Zoom out
Zoom in
Previous page
1/2
Next page
FEATURES AND SPECIFICATION
1. This watch is a combination quartz watch with
analogue and digital displays, 3 hands analogue
movement.
2. Accuracy at normal temperature: ± 30 seconds
a month
3. Time keeping mode: hours, minutes, seconds,
month, date, day of week, “PM”(only available
in 12-hour format)
Press S1 button to show the month and date
indication.
4. Alarm Mode: Daily alarm.
5. Timer Mode:
Measuring unit: 1 second
Input range: from 1 second to 23:59’59”.
6. Stop watch Mode:
Measuring unit: 1/100 of second
Measuring capacity: 23:59’59”.
7. Normal operating temperature range: between
-20°C and 70°C.
8. Battery type: CR2016, SR626SW
SETTING THE TIME (ANALOGUE)
(MODE)
AFTERNOON
HOUR HAND
S4
DAY OF WEEK
C H I M E
SIGNAL
CHRONOGRAPH
SIGNAL
DATE
S2
(SET/RESET)
MINUTES
SECONDS
CROWN
(LIGHT)
A L A R M
SIGNAL
S3
S1
(START/STOP)
CROWN
MINUTE HAND
SECOND HAND
DAY OF WEEK
CHIME SIGNAL
ALARM SIGNAL
SECONDS
T I M E R
SIGNAL
CHRONOGRAPH
SIGNAL
AFTERNOON
DIGITAL DISPLAY A
MINUTES
HOURS
S4
(LIGHT)
(MODE)
S3
S2
(SET/RESET)
S1
(START/STOP)
DATE
T I M E R
SIGNAL
HOURS
CROWN
1. Pull the crown out one step, the second hand
will stop.
2. Set the hands to the correct time by turning the
crown.
3. Push the crown back to the original position. The
watch will start running again.
The analogue indication and digital display of the
time setting can be adjusted separately.
HOW TO CHANGE DISPLAY MODE
HOW TO SET NORMAL TIME/
CALENDAR
1. While in the normal time mode, press S2 button
once. The second digits start to flash.
2. While the second digits are selected (flashing),
press S1 button to reset the seconds to 00. If you
press S1 button while the second count is in the
range between 30 and 59, the seconds are reset
to 00 and 1 is added to minutes. If the second
count is in the range between 00 and 29, the
seconds are reset to 00 but the minute count is
unchanged.
3. Press S3 button to move on to the next setting.
SECONDS
DATE
DAY
12 / 2 4 - H O U R
FORMAT
MONTH
MINUTESHOURS
Press S3 button to change the display mode. Each
time the button is pressed, the mode changes in
the following order.
TIMER
NORMAL TIME CHRONOGRAPH
ALARM
SECOND TIME ZONE
S3
S3
S3
S3
S3
S3
S3
S3S3
S3
S3
NORMAL TIME
12/24 FORMAT SETTING
BY PRESSING S1
DAY OF WEEK SETTING
BY PRESSING S1
DATE SETTING BY
PRESSING S1
MONTH SETTING BY
PRESSING S1
MINUTE SETTING BY
PRESSING S1
HOUR SETTING BY
PRESSING S1
SECOND SETTING BY
PRESSING S1
HOW TO USE STOPWATCH
From the normal time mode, press S3 button once,
you are now in the chronograph mode.
First Usage:
1. Press S1 button alternately to start and stop the
chronograph.
2. Press S2 button to reset the chronograph to zero.
3. Press S3 button to return to normal time
mode. (This can be done at any time with the
chronograph still running.)
Second Usage:
1. Press S1 button to start counting.
2. Press S2 button to show the first split time T1 (0
to T1). The digits stop flashing, but chronograph
is still counting.
3. Press S2 button again to continue counting.
4. Further press S2 button to show the second split
time T2 (0 TO T2). This operation can be repeated
and the split times can be read: 0 to T3, 0 to T4
etc.
5. Press S1 button to stop the measurement of the
chronograph.
6. Press S2 button to show the last split time Tn (0
to Tn).
7. Press S2 button again, the chronograph is reset
to zero.
8. Press S3 button to return to the normal time mode.
S3
S3
S3
S2
NORMAL TIME
START
STOPWATCH
LAP
STOP
S3
S1
S2
S2
S1
S1
S2
S3
S3
S3
S3
S2
S2
NREZ022
4-2014
CAL. Z022 (R23 SERIES)
4. Press S1 button to adjust the value. Holding S1
button down can fasten the process.
5. When the 12-hour format is selected, the indicator
“PM” indicates “p.m. times. There is no indicator
for “a.m. times.
6. Press S2 button to confirm the settings.
DIGITAL DISPLAY B
S3
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z022 in the language / languages: English as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lorus Z022

Lorus Z022 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info