593916
1
Zoom out
Zoom in
Previous page
1/2
Next page
CHARACTERISTICS
1. Time/calendar display: Hour, Minute, Second,
Month, Date and day of the week.
2. Time Indication: 12-hour display format with
PM indicator and 24-hour display format are
available.
3. Daily alarm: The alarm can be set to sound
at the designated time on a 24-hour basis.
4. Chime: The chime can be set to sound every
hour on the hour with a single beep.
5. Stopwatch: The stopwatch can measure
up to 23 hours 59 minutes and 59 seconds
in 1/100-second increments. Lap time
measurement is available.
HOW TO SET THE TIME/CALENDAR
HOW TO SET ALARM TIME
1. From NORMAL TIME display, press and hold S3
for 3 seconds to show the ALARM TIME display.
2. Press S3 again to move on to SECONDS setting.
The second digits start flashing.
3. Press S2
in accordance with a time signal. The
second digits are reset to
“00”
and start
counting immediately.
* When the second digits count any number from
“30” to “59” and S2 is pressed, one minutes is
added. If second digits count any number from
“00” to “29”, minutes will not be changed.
* Selection of the digits to be adjusted (flashing)
is made in the order below by pressing S1 and
then pressing S2 to be set.
* While advancing, hold S2 can fasten the process.
NREZ018
3-2012
CAL. Z018 (R23 SERIES)
1. From NORMAL TIME display, press and hold S3
for 3 seconds to show the ALARM TIME display.
The hour digits start flashing.
2. Press S2 to set HOURS setting.
3. Press S1 to move on to MINUTES setting.
4. Press S2 to set MINUTES setting.
5. After all the setting are completed, press S3 to
return to the NORMAL TIME display.
* Selection of the digits to be adjusted (flashing)
is made by pressing S1 and then pressing S2 to
be set.
* While advancing, hold S2 can fasten the process.
HOW TO SWITCH 12-HOUR/24-HOUR
FORMAT
Engagement/Disengagement of ALARM &
CHIME
* Press S2 and hold it, and then press S1, the ALARM
and CHIME can be engaged or disengaged in
the order below.
* The ALARM signal and/or CHIME signal appear
or disappear on the display accordingly.
* The ALARM sounds for 20 seconds at the
designated time. Press S2 to stop the alarm
after it starts sound.
Press S2 or S1 and hold it. Then press S3 to
switch the display.
* The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternately.
* Under the 12-hour indication format, "PM" mark
appears in the afternoon, but no AM mark
appears in the morning. Under the 24-hour
indication format, no mark appears on the
display.
BUTTONS AND DISPLAYS
HOURS
DAY OF WEEK
CHIME
SIGNAL
MINUTES
SECONDS
ALARM
SIGNAL
S1
S2
S3
AFTER
NOON
4. After all the adjustment are completed, press
S3 to return to the NORMAL TIME display.
* Press S3 at any time to return to NORMAL TIME
DISPLAY.
HOW TO SWICH MONTH/DATE DISPLAY
1. From NORMAL TIME display, press S1 and hold
it to show the MONTH/DATE display.
2. Press S2 to switch to the DATE/MONTH display.
3. Press S2 again to switch back to the MONTH/
DATE display.
* The display format in either MONTH/DATE
indication or in DATE/MONTH indication can
be selected alternately by pressing S2.
The display in other modes
* Press S2 and hold it to show the ALARM TIME,
release to return to NORMAL TIME display.
* Press S1 and hold it to show the MONTH/DATE,
or DATE/MONTH, release to return to NORMAL
TIME display.
PRESS S2
AND HOLD
NORMAL TIME
ALARM TIME
RELEASE
NORMAL
TIME
NORMAL TIME
MONTH/DATE
RELEASE
NORMAL
TIME
PRESS S1
AND HOLD
NORMAL TIME
MONTH/DATE
PRESS S2
DATE/MONTH
NORMAL TIME
ALARM TIME
3 SECONDS
LATER
PRESS S3
NORMAL TIME
PRESS S2
AND HOLD
ALARM TIME
CHIME
SIGNAL
ALARM
SIGNAL
ALARM &
CHIME ON
CHIME OFF
ALARM & CHIME
OFF
CHIME
OFF
CHIME ON
12 HOUR
24 HOUR
AFTER
NOON
PRESS S1 OR
S2 AND HOLD
THEN PRESS S3
PRESS S2
SECONDS
SETTING
PRESS S3
NORMAL TIME
PRESS S3
AND HOLD
3 SECONDS
ALARM TIME
3 SECONDS
LATER
PRESS S1
AND HOLD
PRESS S3
PRESS S1
PRESS S2
MINUTES
SETTING
PRESS S1
PRESS S2
HOURS
SETTING
PRESS S1
PRESS S2
MONTH
SETTING
PRESS S1
PRESS S2
DATE
SETTING
PRESS S1
PRESS S2
DAY OF WEEK
SETTING
PRESS S2
PRESS S3
AND HOLD
PRESS S1
PRESS S2
MINUTES SETTING
PRESS S2
HOURS
SETTING
PRESS S1
PRESS S2
AND HOLD
THEN PRESS S1
ALARM OFF
PRESS S2
AND HOLD
THEN PRESS S1
CHIME ON
PRESS S2 AND HOLD
THEN PRESS S1
ALARM & CHIME ON
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z018 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info