593910

Lorus Z010 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
How to stop the alarm while sounding
The alarm sounds for 10 seconds at the
designated time. To stop it manually while
sounding, press any Button.
Press Button D five times to go to the SINGLE-TIME
ALARM mode. The SINGLE-TIME ALARM mode
indicator appears on the display.
1. Press Button A for 2 seconds to change the
display to the SINGLE-TIME ALARM SETTING
mode. The minute digits start flashing.
2. Press Button B or C to set the minute digits.
One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
3. Press Button D to confirm the minute setting
and move on to the hour setting.
One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
4. Press Button D to confirm the hour setting and
move on to the year setting. The year digits
start flashing.
5. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
6. Press Button D to confirm the year setting and
move on to the month setting. The month digits
start flashing.
7. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
8. Press Button D to confirm the month setting
and move on to the date setting. The date
digits start flashing.
9. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
10. Press Button A to complete the single time
alarm setting.
11. Press Button D to return to the TIME/CALENDAR
mode.
A
D
D
MINUTE SETTING
HOUR SETTING
DATE SETTING
D
YEAR SETTING
MONTH SETTING
D
D
Note: The alarm can be set only in one time zone.
Engagement/disengagement of daily alarm
With each press of Button B in the DAiLY ALARM
mode, the alarm can be alternately engaged
or disengaged. The ALARM signal appears or
disappears on the display accordingly.
How to stop the alarm while sounding
The alarm sounds for 10 seconds at the
designated time. To stop it manually while
sounding, press any Button.
Engagement/disengagement of single-time
alarm
With each press of Button B in the SINGLE-TIM
ALARM mode, the alarm can be alternately
engaged or disengaged. The ALARM signal
appears or disappears on the display accordingly.
A
The miniature battery CR2032 which powers
your watch should last approximately 4 years.
However, because it is inserted at the factory,
the actual life of the battery once in your
possession may be less than 4 years.
Be sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery we recommend taking the
watch to a local watch repair shop.
Note: If the alarm is used for more than 20
seconds a day and/or the illuminating
light for more than 8 seconds a day, the
battery life may be less than the specified
period.
■
BATTERY CHANGE
■
HOW TO SET SECOND TIME ZONE
Press Button D six times to go to the SECOND TIME
ZONE mode.
1. Press Button C to select the city code.
2. If the daylight saving time is effective in the
selected city, press Button B to show the
daylight saving time. The daylight saving time
(“ DST”) mark will appear.
Press Button D to return to the TIME/CALENDAR
mode.
■
HOW TO USE EL BACKLIGHT
In any mode press Button A to illuminate the
display for about 4 seconds.
Note:
1. The backlight of the watch employs an
electro-luminescent (EL) light, which tends to
lose illuminating power after very long use.
2. The illumination provided by backlight may
be hard to see when viewed under direct
sunlight.
Local city
■
CARE OF YOUR LORUS WATCH
This watch contains precise electronic
components. Never attempt to open the case
or remove the back cover.
• BATTERY
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place be
-
yond the reach of chil dren. If a child
swallows it, consult a doctor immedi
-
ately.
• WATER RESISTANT
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin div
-
ing
Scuba
diving
Indication
on the dial/
case back
No
Indication
* If your watch is 200 M/20 BAR, 100 M/10
BAR or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
• Do not operate the buttons when the watch is
wet.
• If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly
dry.
• Should you find any water or condensation
inside the watch, immediately have it
checked. Water can corrode electric parts
inside the case.
NO NO NO
YES YES NO NO
YES YES NO
NO
NO
NO
YES
WATER RE-
SISTANT
WATER RE-
SISTANT
(50M/5 BAR
)
WATER RE-
SISTANT
100M/10 BAR
or above
(
NO
(
Caution:
Leather straps are not water resistant except
so indicated, even if the watch head is water
resistant.
• ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly. If
not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
• MAGNETISM
Your watch will be adversely affected by strong
magnetism.Keep it away from close contact
with magnetic objects.
• SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, but be careful not to drop it or hit it on
hard surfaces.
• TEMPERATURE
Your watch is preadjusted so that constant
accuracy may be insured at normal tem pera-
ture.
• CLEANING
Use only a soft cloth and clean water for
cleaning your watch. Never use chemicals, as
the waterproof gasket will corrode.
■
SERVICE
When your LORUS watch requires repair or
servicing, please see the enclosed WARRANTY/
GUARANTEE.
Printed in China
City code
H11
HNL
ANC
LAX
DEN
CHI
NYC
SDQ
RIO
H02
H01
GMT
LON
PAR
CAI
JED
DXB
KHI
DAC
BKK
HKG
TYO
SYD
NOU
WLG
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
0
1
2
3
4
5
6
7
8
9
10
11
12
Time
differences
City
Pago Pago
Honolulu, Patete
Anchorage, Nome
Los Angeles, San Francisco,
Las Vegas, Vancouver, Seattle
Denver, Edmonton
Chicago, Mexico City, Houston,
New Orleans, Winnipeg
New York, Washington, D.C.,
Montreal, Lima, Havana, Boston
Santo Domingo(*)
Rio de Janeiro, Buenos Aires,
Brasilia, Montevideo, São Paulo
Praia
London, Dublin, Reykjavik,
Casablanca, Lisbon
Paris,
Vienna, Brussels, Berlin,
Madrid, Rome, Milan, Algiers,
Hamburg, Frankfurt, Stockholm
Cairo, Athens, Helsinki,
Istanbul, Beirut, Damascus
Jeddah, Baghdad, Nairobi,
Kuwait, Riyadh, Moscow
Dubai, Abu Dhabi,
Muscat
Karachi, Male
Dacca, Colombo
Bangkok, Hanoi, Jakarta,
Phnom Penh, Vientiane
Hong Kong, Beijing, Singapore,
Manila, Taipei, Kuala Lumpur, Perth
Tokyo, Seoul, Pyongyang
Sydney, Guam, Melbourne, Rabaul
Nouméa, Port Villa
Wellington, Auckland,
Christchurch, Nauru Island
Second time zone
Local time
Time and
date of
Second time
zone
Note: The alarm can be set only in one time zone.
MINUTE SETTING
ALARM
NUMBER SETTING
■
HOW TO USE SINGLE-TIME ALARM
A
D
D
HOUR SETTING
A
D
■
HOW TO USE DAILY ALARM
Press Button D four times to go to the ALARM
mode. The DAILY ALARM mode indicator appears
on the display.
1. Press Button A for 2 seconds to change the
display to the DAILY ALARM SETTING mode. The
hour digits start flashing.
2. One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
3. Press Button D to confirm the hour setting and
move on to the minute setting. The minute
digits start flashing.
4. Press Button B or C to set the minute digits.
One digit (flashing) is increased or decreased
with each press of Button B or C, respectively.
To move the digits quickly, keep the Button
pressed.
5. Press Button D to confirm the minute setting
and move on to the alarm number setting. The
alarm number starts flashing.
6. Press Button B or C to select the alarm number.
7. Press Button A to complete the alarm setting.
TIMER OPERATION
1. Press Button B in the TIMER mode to start the
countdown timer.
2. Press Button B to stop the countdown timer.
3. To reset the timer, press Button C.
Press Button D to return to the TIME/CALENDAR
mode.
B
B
C
Start
Stop
Reset
TIMER number
B
C
B
B
C
D
D
MINUTE SETTING
HOUR SETTING
SECOND SETTING
TIMER NUMBER SETTING
A
C
C
C
B
C
B
C
B
C
B
C
B
C
B
C
B
C
A
A
B
C
YES
(*) The display shows “CCS” (Santiago), but
currently Santiago is UTC-3.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z010 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lorus Z010

Lorus Z010 User Manual - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info