593908
1
Zoom out
Zoom in
Previous page
1/2
Next page
NREZ008
10-2005
CAL. Z008 (R23 SERIES)
FEATURES AND SPECIFICATION
1. This watch is a combination quartz watch
with analogue and digital displays, 3 hands
analogue movement.
2. Accuracy at normal temperature: +30
seconds a month.
3. Time keeping mode: hours, minutes, seconds,
month, date, day of week, pm ‚“PM‚”.
4. Alarm Mode: daily alarm.
5. Timer Mode: Measuring unit: 1 secondInput
range: from 1 second to 23:59’59”.
6. Stop watch Mode: Measuring unit 1/100 of
second measuring capacity: 23:59’59”.
7. Normal operating temperature range: 10°C
~ 40°C.
8. Battery type: CR2032, SR626SW
SETTING THE TIME (ANALOGUE)
(MODE)
1. Pull the crown cut one step, the second hand
will stop.
2. Set the correct time by turning the crown.
3. Push the crown back to the original position.
The watch will start running again.
The analogue indication and digital display of
the time setting can be adjusted separately.
HOW TO CHANGE DISPLAY MODE
HOW TO SET NORMAL TIME/CALENDAR
(LCD)
1. While in the normal time mode, press S2
button, the seconds digit starts to flash on
the display because it is selected.
2. Press S3 button to change at selection of setting.
SECONDS
DATE
DAY
12/24-HOUR
FORMAT
MONTH
MINUTES
HOURS
3. Press S1 button to advance the selection. Holding
down S1 button changes the high speed.
4. When the 12-hour format is selected, the
indicator “PM” indicates “p.m.” times. There
is no indicator for “a.m.” times.
5. While the seconds digits are selected
(flashing), press S1 button to reset the
seconds to 00. If you press S1 button while
the seconds count is in the range of 30 to 59,
the seconds are reset to 00 and 1 added to
the minutes. If the seconds count is in the
range of 00 to 29, the minutes count is
unchanged.
6. Press button S2 after complete the setting.
NORMAL TIME
12/24 FORMAT SETTING
BY PRESSING S1
DAY OF WEEK
SETTING BY
PRESSING S1
DATE SETTING BY
PRESSING S1
MONTH SETTING BY
PRESSING S1
MINUTE SETTING BY
PRESSING S1
HOUR SETTING BY
PRESSING S1
SECOND SETTING BY
PRESSING S1
HOW TO USE STOPWATCH
From normal time mode, press S3 button once,
you are now in the chronograph mode.
First Usage:
1. Press S1 alternately to start and stop the
chronograph.
2. Press S2 to reset the chronograph to zero.
Second Usage:
1. Press S1 to start, “ ” flash and the “day of
week” start to roll to the right.
2. Press S2, “day of week” stop rolling, “
keeps flashing, the chronograph keeps
counting the time and first time split T1 (0 to
T1) shows.
3. Press S2 again, “day of week” keep rolling
and chronograph shows the counting time.
4. Further press S2, “day of week” stop rolling,
” keeps flashing, the second split time T2
(0 TO T2) shows. This operation can be
repeated and the splits time can be read: 0
to T3, 0 to T4 etc.
5. Press S1 to stop the time counting of the
chronograph. “Day of week” sign
disappears and “
” stop flashing.
6. Press S2, the last split time Tn (0 to Tn) shows.
7. Press S2 again, the chronograph is reset to zero.
PM
TR
PM
TR
PM
P
M
S3
S3
S3
S2
NORMAL TIME
START
STOPWATCH
LAP
STOP
P
M
S3
S1
S2
S2
S1
HOW TO SET ALARM TIME
1. You can set alarm with hours and minutes.
When the alarm is on, the alarm (BI-BI) sound
for 20 seconds at the preset time. Press S1,
S2 or S3 to stop the alarm after it starts sound.
2. From the normal time mode, press S3 button
for 2 times into alarm mode.
3. While in the alarm mode, press S2 button to
begin setting procedure. The hour digits
begin flashing.
4. To adjust the flashing digits, press S3 button.
5. To move to minute digits, press S1 button.
TIMER
NORMAL TIME
CHRONOGRAPH
ALARM
SECOND TIME ZONE
TR
AFTERNOON
HOURS
S4
DAY OF WEEK
CHIME SIGNAL
CHRONOGRAPH
SIGNAL
DATE
S2 (SET)
MINUTES
SECONDS
CROWN
(LIGHT)
TIMER
SIGNAL
S3
S1 (START/
STOP)
ALARM SIGNAL
S4
S2
S3
S1
CROWN
P
M
S3
S3
S3
S3
S3
S3
S3
S3S3
S3
P
M
S2
P
M
S3
S3
S3
S3
S3
S2
S2
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Z008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Z008 in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info