593899
1
Zoom out
Zoom in
Previous page
1/2
Next page
HOW TO SET THE TIME/CALENDAR
The setting sequence is shown below.
1. Press Button C three times to enter the Time
Setting mode. The second digits start
flashing.
The “2” appears on the display to indicate
that the watch is in the Time Setting mode.
CHARACTERISTICS
1. Time/Calendar display: Hour, minute,
second, date, day of the week and month
are displayed.
2. Stopwatch: The stopwatch can measure up
to 24 hours in 1/100-second increments for
the first 30 minutes, and in 1-second
increments thereafter. Lap time
measurement is available.
3. Alarm: The alarm can be set to ring at a
designated time.
4. Electro Luminescent Backlight: The built-in
electro luminescent backlight illuminates the
display for easy viewing in the darkness.
Normal
Time
Display
A
B
C
D
To show the date,
press Button
To turn the backlight on,
press Button or
To change mode,
press Button
To show the alarm time,
press Button
Button operation from normal Time Display
E
DISPLAY AND BUTTON OPERATION
Second Hour
Minute
Date
Month
Day of
the week
Day of the week
A
B
C
D
E
ST/STP
RESET
MODE
LIGHT
Hour
Minute
Second
ST/STP
RESET
MODE
LIGHT
A
B
C
* When the second digits are counting any
number between “30” and “59” and Button
A is pressed, the second digits are reset to
zero and one minute is added.
3. Press Button B to confirm the second setting
and move on to the minute setting. The
minute digits start flashing.
4. Press Button A to adjust the minute digits.
* Keep Button A pressed to forward the digits
rapidly.
5. Press Button B to confirm the minute setting
and move on to the hour setting. The hour
digits start flashing.
6. Press Button A to adjust the hour digits.
* When setting the hour, make sure that am/
pm is set correctly.
7. Press Button B to confirm the hour setting and
move on to the date setting.
8. Repeat the same procedures for all other
settings; press Button A to adjust digits and
press Button B to confirm the setting and
move on to the nest setting.
9. After all the adjustments are completed,
press Button C to return to the Time display.
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 24 hours in
1/100-second increments for the first 30 minutes,
and in 1-second increments thereafter.
ST/STP
RESET
MODE
LIGHT
A
B
C
* There is no Button E for Cal. YK36.
2. Press Button A simultaneously with a time
signal to reset the second digits to zero. The
second digits instantly start counting.
NREYK35C
3-2005
CAL. YK35, YK36 (R23 SERIES)
Standard Measurement
1. Press Button C to enter the Stopwatch mode.
2. Press Button A to start timing.
3. Press Button A to stop.
4. Press Button B to reset the stopwatch to zero.
5. To exit the Stopwatch mode and return to
the Time display, press Button C.
Lap Time Measurement
1. Press Button C to enter the Stopwatch mode.
2. Press Button A to start timing.
3. To view lap time, press Button B while the
stopwatch is counting. Lap time is shown on
the display while the stopwatch continues to
count internally.
4. Press Button B again to go back to the display
of the measurement in progress.
5. Press Button A to stop timing.
6. Press Button B to reset the stopwatch to zero.
7. To exit the Stopwatch mode and return to
the Time display, press Button C.
* Lap time readings can be repeated by
pressing Button B.
* For Cal. YK36, different indicators appear
on display.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus YK36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus YK36 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info