593880
1
Zoom out
Zoom in
Previous page
1/4
Next page
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 9 hours,
59 minutes, 59 seconds and 99 in 1/100
seconds.
* Even if the stopwatch display is changed
to another while the measurement is in
progress, it continues counting properly.
After the stopwatch is used, however, be
sure to reset it as the battery energy is
consumed enormously to shorten the battery
life.
CHARACTERISTICS
1. Stopwatch: Measures up to 9 hours, 59
minutes, 59 seconds and 99 with 1/100
second readout.
Lap time measurement: Up to 9 lap
times can be measured. The lap time
difference and the fastest lap time are
calculated and displayed during the
measurement.
2. Time/calendar display: Hour, minutes,
seconds, month, date and day of the week.
Automatic calendar adjustment: Calendar
adjusts automatically for odd and even
months including February of leap years,
but not for February of common years.
Time indication: Changeover between
12- and 24-hour indications is possible.
3. Daily alarm: The alarm can be set to
ring on a 24-hour basis.
4. Dual time: Time of a different time zone
can be set and displayed.
5. Stroke function: The watch can be set
to beep at a selected rate to serve as a
pacemaker in jogging, etc.
6. Countdown timer: Up to 9 hours 59
minutes and 59 seconds can be set in seconds.
Lap time measurement
“Lap time” refers to an elapsed time required
to cover a given section of the whole distance.
1. At the start of the activity, depress button
“D” to start the stopwatch.
2. At the end of the first lap, depress button
“B”.
The first lap time and lap number are dis-
played, though the second lap time is be-
ing measured internally.
3. Depress button “B” to release the lap time
before the end of the second lap. The first
lap time and lap number disappear, and
the measurement in progress and “0” are
displayed in place of the lap time and lap
number, respectively.
4. At the end of the second lap, depress but-
ton “B”. The second lap time and lap
number are displayed, though the third
lap time is being measured internally.
5. Measurement and release of the lap time
can be repeated by depressing button “B”.
6. At the end of the activity, follow either of
the two methods below.
a. To display the final lap time, depress
button “B”. Then, depress button “B”
to release the lap time, and depress button
“D” to stop the measurement.
* The time displayed when button “D”
is depressed is not the total elapsed
time of the activity, that is, the time
that elapsed from the start until the
end of the activity but the time that
elapsed from the start until the stop of
the measurement.
b. To display the total elapsed time of the
activity, depress button “D” to stop the
measurement.
7. Depress button “C” to reset the stopwatch.
Stopwatch operation
Month (Day)
Date
A
* A flashing display mark indicates that the
corresponding function is in use.
Timer
display
A
Dual time
display
A
Stroke
display
BUTTONS AND DISPLAYS
C
Reset
Start Stop
Restart
Stop
Accumulate repeatedly by
depressing button “D”.
Accumulated elapsed time measurement
DD
D
C
Depress button “A” to show the stopwatch
display.
Notes:
1. When a lap time measured is the fastest
among the lap times previously measured,
a short beep rings to signal that the memory
has been updated with the new fastest lap
time.
2. The lap number counts up to “9”. After
“9”, the number returns to “1”.
The selection of the display can be made in
the following order with each depression of
button “A”.
Stopwatch
display
Time/calendar
display
A
Alarm
display
A
A
D
Stopwatch display
mark
C
INSTRUCTION MANUAL
CAL. Y704 (R23 SERIES)
NREY704B
10-98
Minutes
Hour
PM
mark
B
D
A
Seconds
D
B
Seconds
Minutes
1/100 second
A
Hour
Alarm
mark
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus Y704B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus Y704B in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info