593866
2
Zoom out
Zoom in
Previous page
1/4
Next page
Seconds setting
Depress button “D” in accordance with a time
signal. The seconds are reset to “00” and start
immediately.
When the seconds count any number from “30” to
“59” and button “D” is depressed, one minute is
added and the seconds are reset to “00”.
Notes:
1. When setting the hour digits in the 12-hour
indication, check that “A”(AM)/“P”(PM) mark
is set properly. In the 24-hour indication, there
is no indication.
2. Once the year, month and date have been set,
the day of the week is set automatically.
3. If the watch is left untouched in the time/cal-
endar setting display with the digits flashing,
it will automatically return to the time/calendar
display in 2 to 3 minutes.
Stopwatch Operation
Depress mode selector
“A” to show the
stopwatch display.
Turn mode selector
“A” to set “CHRONO
G.” at the 12 o’clock
position.
Accumulated elapsed time measurement
C
C
Stop
Start
Reset D
**Accumulate repeatedly by depressing button
“C”.
C
Restart
Stop
C
[Memory recall after measurement]
1. Depress button “B” to show the memory recall
display. The oldest measurement stored in
memory is displayed.
2. Wity each depression of button “D”, the stored
data are recalled successively from the oldest
to the newest.
[Memory recall during measurement]
1. Depress button “B” to show the memory recall
display. The newest measurement stored in
memory is displayed.
2. With each depression of button “D”, the stored
data are recalled successively from the oldest
to the newest.
Note: Even if the digits are reset to “00” in the
stopwatch measurement, stored data is not
erased and can be recalled unless a new
measurement is started.
Lap time measurement
“Lap time” refers to an elapsed time required to
cover a given section of the whole distance.
C
D
Lap 1 D
C
Lap 2Start
D
StopReset
Notes:
1. The lap number counts up to “99”. After “99”,
the number is displayed in two digits such as
“00” for 100, “01” for 101, and so on.
2. Up to 8 lap times can be stored in memory. If
more than 8 lap times are measured, the measurements
over 8 will not be stored in memory.
Memory Function
Up to 8 lap times are automatically stored in
memory, and they can be recalled either during
or after the measurement.
Selection of the preset time
How to Use the Preset Timer
Hourly time
signal mark
Four different lengths of time (3, 5, 10 and 15
minutes) have been preset for the timer.
Auto
illumination
mark
Turn mode
selector “A” to
set the desired
preset time at
the 12 o’clock
position.
1. Depress mode selector
“A” to show the timer
display. The time set
previously will be displayed.
2. Depress button “D” to
select the desired preset
time. Selection of the
preset time is made in
the following order by
depressing button “D”.
5 min.3 min.
Adjustable
timer
10 min.15 min.
→→
C
C
Preset timer operation
Depress buttons in the following order.
Stop
C
C
D
Start Restart Stop
Restart and stop of the
timer can be repeated
by depressing button
“C”.
Warning
sound
beeps.
Time-up
* When the set time is up, a warning sound beeps
for 5 seconds as the display is illuminated. To
stop them manually, depress/turn mode selector
“A”, or depress button “B”, “C”, “D” or LITE
button.
Notes:
1. After the countdown is repeated 99 times, the
number of times the countdown is repeated is
displayed in two digits such as “00” for 100,
“01” for 101, and so on.
2. Once the timer is set, the set time is retained
and can be used repeatedly unless it is readjusted.
How to Use the Adjustable Timer
The adjustable timer can be set up to 9 hours
and 59 minutes in minutes.
Adjustable timer setting
1. Depress mode selector
“A” to show the timer
display.
2. Depress button “D” to
select the adjustable timer.
Selection of the adjustable
timer and preset timers
is made in the following
order by depressing button
“D”.
5 min.3 min.
Adjustable
timer
10 min.15 min.
→→
1. Turn mode
selector “A”
to set “
MIN.”
at the 12
o’clock posi-
tion. Then,
proceed to step
“3” below,
skipping step
“2”.
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
**
**
CHRONO
CHRONO
CHRONO
“RECALL” mark
D
B
Preset
time
Hour
Minutes
Number of
times the
countdown
is repeated
CHRONO
TIMER
D
C
B
B
C
D
1/100
seconds
Seconds
Minutes
Stopwatch display mark
Hour
CHRONO
Lap No.
Seconds
Timer display mark
Reset
* Lap time measured and lap number remain
displayed for 10 seconds, and then the mea-
surement in progress and the current time
appear.
** Can repeat by depressing button “D”.
HOW TO USE THE TIMER
Two types of timers (adjustable timer and preset
timer) are available.
After the set time is up, the timer counts down
the set time repeatedly. After the timer is used,
therefore, be sure to reset it as the battery
energy is consumed enormously to shorten the
battery life.
By turning on the button operation confirmation
sound, a beep sounds every minute to signal
the lapse of time.
By turning on the auto illumination function,
the display is illuminated every minute to signal
the lapse of time for the last 19 minutes of the
countdown. If the countdown is repeated more
than 10 times, however, the display will not be
illuminated.
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 9 hours, 59
minutes, 59 seconds and 99 in 1100 seconds.
By turning on the button operation confirmation
sound, a beep sounds every minute to signal the
lapse of time.
By turning on the auto illumination function,
the display is illuminated every minute to signal
the lapse of time for the first 19 minutes.
* Even if the stopwatch display is changed to
another while the measurement is in prog-
ress, it continues counting properly. After
the stopwatch is used, however, be sure to
reset it as the battery energy is consumed
enormously to shorten the battery life.
* While the stopwatch is measuring, the graphic
display turns on and off repeatedly.
Current time
Hourly time
signal mark
Auto
illumination
mark
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W650 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info