593860

Lorus W209 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
■ CHARACTERISTICS
1. Time: Hour and minutes are displayed in
the time display. Seconds are displayed
in the second display.
2. Calendar display: Month and date can
be displayed. Calendar adjusts automatically
for odd and even months except February
of leap years.
■ DISPLAY AND BUTTON OPERATION
Hour MinuteColon
B
A
Button A: Selection of the digits to be
adjusted in the time/calendar
setting function.
Button B:
1) In the time display, each press of button
“B” changes the display as follows:
Time display
(hour & minute)
Calendar display
(month & date)
B
BB
*
Second display
*The calendar display will return to
the time (hour and minute) display
automatically after 3 seconds.
2) Setting the desired digits to be adjusted
in the time/calendar setting function.
Notes:
In the time display, if button “A” is pressed
once, the time display and calendar display
will change alternately every 2 seconds.
* Press button “A” 5 times to return to the
time display.
B
* If button “B” is pressed when the time
and calendar displays are being changed
alternately, the second display will be
shown. If button “B” is pressed again,
the alternately changing displays will appear
again.
* When pressing button “A”, use the tip of
a ball-point pen or something which has
a pointed tip.
■ HOW TO SET THE TIME AND CALENDAR
1. While the time display is shown, press
button “A” twice. The time/calendar
setting function will be activated displaying
the digit representing the month.
The digits to be adjusted will appear in
the following order with each press of
button “A”.
Month
Date
➔
A
Hour, A/P
➔
A
Minute
➔
A
➔
Time display
(hour & minute)
➔
Hour & minute
A
A
Watch is not
operating
()
Watch starts
operating
()
(
)
Press
twice
➔
*1 *2
2. Press button “B” to set the time and
calendar. One digit is advanced with
each press of button “B”. Digits advance
quickly by keeping the button pressed.
*1 After adjusting the minute digits, press
button “A”. The hour and minute display
will be shown but the watch will not
start operating. (The colon mark stops
flashing)
Press button “B” in accordance with
any exact time signal (on the radio,
TV or telephone). The seconds will
be reset to “00” and start immediately.
*2 When the minute digits need not be
adjusted, press button “A” to return to
the time display.
Notes:
1. While setting the hour, be sure to check
that AM (A)/PM (P) is set correctly.
2. When setting the minutes, be sure to set
the time 1 to 2 minutes ahead and wait for
the time signal to set the time exactly.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W209 in the language / languages: English as an attachment in your email.

The manual is 0,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info