593848
1
Zoom out
Zoom in
Previous page
1/3
Next page
Button B : Calendar (month, date and day)
display in the time/calendar display.
• Start/stop in the stopwatch func-
tion.
Selection of the digits to be ad-
justed in the alarm setting func-
tion and the time/calendar set-
ting function.
Button C : Alarm display in the time/cal-
endar display.
Split/split release/reset in the
stopwatch function.
Setting the digits in the alarm
setting function and the time/
calendar setting function.
Stopping the alarm in any dis-
play.
Button
B while keeping button C pressed:
Engagement and disengagement
of the alarm and the time signal.
Button C while keeping button B pressed:
Changeover of the calendar (month
and date) display.
Buttons B & C:
Alarm test in the time/calendar
display.
CHARACTERISTICS
1. Time/calendar display: Hour, minute,
seconds, date, day of the week and month.
2. Automatic calendar adjustment: Cal-
endar adjusts automatically for odd and
even months except February of leap years.
3. Time indication: Changeover between
12-hour and 24-hour indications is pos-
sible.
4. Stopwatch: 24 hour stopwatch with 1/
100 second readout up to 1 hour and with
1 second readout after the first 1 hour.
Split time measurement is available.
5. Alarm: The alarm rings at the designated
hour and minutes for 20 seconds.
6. Hourly time signal: Can be set to ring
every hour on the hour with a single “beep”.
7. Illuminating light: The light illuminates
the display in the dark.
HOW TO SET THE DUAL CALEN-
DAR DISPLAY
1 Press button “B” to show the calendar (month,
date, and day) display. The calendar dis-
play is shown while button “B” is kept
pressed.
2 The month and the date change places
with each other with each press of button
“C” while keeping button “B” pressed.
INSTRUCTION MANUAL
CAL. W120 (RBZ SERIES)
CAL. W121 (RB6 SERIES)
CAL. W130 (RBN SERIES)
NREW120C
11-99
DISPLAY AND BUTTON OPERATION
Button A : Selection of the display.
The selection is made in the following order:
A
A
A
----------------------------
------
------
----------------------------
Time/calendar display
Stopwatch display
A
Time/calendar setting Alarm setting
Press
button “A”
for 2 seconds.
• The design of the digital display differs
depending on the calibre. The illustra-
tions of the display shown in this manual
refer to Cal. W120.
B
C
A
Light
button
Day indicator
Time signal mark Alarm mark
Seconds
MinutesHour
* In the 12-hour indication, the AM/PM mark
is displayed. In the 24-hour indication, there
is no indication.
DateMonth
Day Day
B
C
B
C
Date Month
HOW TO USE THE STOPWATCH
C: Split/
Split release/
Reset
A
1/100 seconds
B: Start/Stop
Stopwatch
indicator
Split indicator
Stop indicator 1/100 second
indicator
SecondsMinutes
1 Press button “A” to show the stopwatch
display. (The stopwatch indicator starts
flashing.)
The stopwatch can measure up to 24 hours
and is displayed in minutes, seconds, and
1/100 seconds up to 1 hour, and in hours,
minutes, and seconds after the first 1 hour.
(The 1/100 second indicator flashes dur-
ing the first 1 hour.)
When the measurement is over 24 hours,
the stopwatch will be reset to “0:00oo”
and start counting again.
2 Reset the digits to “0:00oo” before using
the stopwatch. When the split and the
stopwatch indicators are flashing, press
button “B” to check that the stop indicator
starts flashing, and then press button “C”
twice to reset the digits to zero.
3 When measuring a long period of time,
return the stopwatch to the time/calendar
display after the stopwatch starts to pre-
vent any possible mistaken operation.
* When button “B” or “C” is pressed in the
stopwatch display, a single “beep” sounds
to confirm the operation.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W130 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info