593843
1
Zoom out
Zoom in
Previous page
1/3
Next page
INSTRUCTION MANUAL
CAL. W100 (RBM SERIES)
NREW100
01-99
CHARACTERISTICS
1. Time/calendar display: Hour, minutes,
seconds, month, date and day of the week.
Fully automatic calendar: Calendar adjusts
automatically for odd and even months including
February of leap years from the year 1998 to
the end of 2048.
Time indication: Changeover between
12- and 24-hour indications is possible.
2. Stopwatch: Measures up to10 hours with 1/
100 second readout.
Lap time measurement: When the fastest
lap time is measured, a beep sounds and the
display is illuminated.
Auto start function: The stopwatch can be
set to start automatically at a desired time .
3. Countdown timer:
Preset timer: Five different lengths of time
(3, 10, 15, 30 and 45 minutes) have been
preset for the timer.
Adjustable timer: Up to 23 hours and 59
minutes can be set in minute increments.
4. Daily alarm: The alarm can be set to ring on
a 24-hour basis.
Hourly time signal: Can be set to ring
every hour on the hour.
5. Dual time: Time of a different time zone can
be set and displayed.
6. Illuminating light: The light illuminates
the display in the dark.
1. Press button “A” to show the time/calendar
display.
2. Press button “A” for 2 seconds to show the
time/calendar setting display. The second
digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “B”.
Date Month
4. Press button “C” to set the flashing digits.
One digit is advanced with each press of
button “C”. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “C” pressed.
5. After all the adjustments are completed,
press button “A” to return to the time/
calendar display.
Notes:
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
calendar setting display with the digits
flashing, it will automatically return to the
time/calendar display in 2 minutes.
Seconds setting
When the seconds digits are flashing, press
button “C” in accordance with a time signal.
The seconds are reset to “00” and start immediately.
When the seconds count any number from
“30” to “59” and button “C” is pressed, one
minute is added and the seconds are immediately
reset to “00”.
Year
Hour
Minutes
Seconds
12-/24-hour
indication
HOW TO USE THE STOPWATCH
The stopwatch can measure up to 10 hours
in 1/100 seconds.
* Even if the stopwatch display is changed to
another while the measurement is in prog-
ress, it continues counting properly. After
the stopwatch is used, however, be sure to
reset it as the battery energy is consumed
enormously to shorten the battery life.
B
C
A
Minutes Seconds 1/100 seconds
Stopwatch
display mark
Stopwatch Operation
Press button “A” to show the stopwatch display.
BUTTONS AND DISPLAYS
MODE
START
LAP
LIGHT
AM/PM
mark
Hour Minutes
Light
button
Alarm
mark
Hourly time
signal mark
Day
Seconds
A
B
Month
Date
The selection of the display can be made in the
following order with each press of button “A”.
Timer
display
A
A
Stopwatch
display
Alarm
display
Time/calendar
display
A
A
With each press of button “B” in the time/calen-
dar display, the display changes over between
the time/calendar and dual time alternately.
Time/calendar
display
Dual time
display
B
I
NSTRUCTION
M
ANUAL
CAL. W100 (RBM SERIES)
NREW100
01-99
Month
Hour Minutes Seconds
B
C
Day Date
AM/PM
mark
A
HOW TO SET THE TIME/CALENDAR
Start Stop
Restart
Stop
Accumulated elapsed time measurement
BB BB
C
Reset
Accumulate repeatedly by
pressing button “B”.
Lap time measurement
Start
B
“Lap time” refers to an elapsed time required
to cover a given section of the whole distance.
Lap 1
C
C
Stop
Reset
BC
Note: When a lap time measured is the fastest
among the lap times previously measured,
a beep rings and the display is illuminated.
** Can repeat by pressing button “C”.
Lap 2
**
C
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus W100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus W100 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info