593822

Lorus VD67 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
NREVD67
10-2005
CAL. VD67 (RL8 SERIES)
■ CHARACTERISTICS
1. Time: Indicated by the hour, minute and
small second hands.
2. Date: Displayed in numerals.
3. Stopwatch: Measures up to 12 hours in 1/5
second increments.
• Split time measurement
Minute hand
■ DISPLAY AND CROWN OPERATION
a. Normal position : Free
b. First click : Date setting
c. Second click : • Time setting
• Adjusting the stopwatch
hand position
Hour
hand
Small second
hand
A
B
a b c
Crown
Date
Stopwatch
minute hand
Stopwatch
hour hand
Stopwatch
1/5-second hand
■ SETTING THE TIME AND ADJUSTING
THE STOPWATCH HAND POSITION
Minute hand
Hour hand
1) Time/Calendar setting
Small second
hand
1. Pull out the crown to the first click, and turn it
clockwise until the previous day’s date
appears.
2. Pull out the crown to the second click when
the small second hand is at the 12 o’clock
position.
3. Turn the crown clockwise until the desired
date appears.
4. Turn the crown to set the hour and minute
hands.
5. Push the crown back in to the normal position
in accordance with a time signal.
Notes:
1. Do not set the date between 9:00 p.m. and
1:00 a.m., as the date may not change
properly.
2. When setting the hour hand, be sure to check
that AM/PM is correctly set. The watch is so
designed that the date changes once in 24
hours.
* Turn the hands past the 12 o’clock marker to
determine whether the watch is set for the
A.M. or P.M. period. If the date changes,
the time is set for the A.M. period. If not, the
time is set for the P.M. period.
3. When setting the minute hand, first advance
it 4 to 5 minutes ahead of the desired time
and then turn it back to the exact minute.
B
1. Pull out the crown to the second click.
2. Press button A. The stopwatch 1/5-second
hand turns a full circle.
3. Press button A repeatedly to reset the
stopwatch 1/5-second hand to the “0”
position.
4. Press button B. The stopwatch minute hand
turns a full circle.
5. Press button B repeatedly to reset the
stopwatch hour and minute hand to the “0”
position.
* The stopwatch hour hand moves
correspondingly with the stopwatch minute
hand.
* The stopwatch hands turn continuously if the
respective buttons are kept pressed, and the
hands stop when the respective buttons are
released.
6. Push the crown back in to the normal
position.
Stopwatch
hour hand
Stopwatch
minute hand
2) Stopwatch hand position adjustment
• If the stopwatch hands are not in the “0”
position, follow the procedure below to set
them to the “0” position.
Stopwatch
1/5-second hand
A
• The stopwatch can measure up to 12 hours
in 1/5 second increments.
• The measured time is indicated by the three
stopwatch hands that move independently
of the hands for time display.
• When the measurement reaches 12 hours,
the stopwatch automatically stops counting.
■ STOPWATCH
A: Start/ Stop
B:Split/ Split
release/ Reset
Stopwatch
1/5-second hand
Stopwatch
hour hand
Stopwatch
minute hand
✩ Before using the stopwatch, be sure to check
that the crown is set at the normal position
and that the stopwatch hands are reset to
the “0” position.
* If the hands do not return to the “0”
position, follow the procedure in “
n
SETTING THE TIME AND ADJUSTING THE
STOPWATCH HAND POSITION”.
Crown
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorus VD67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorus VD67 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info